Características destacadas
- Fast copying of cyclic I/O data between two networks (10-15 ms)
- Proven and tested with all PLC manufacturers
- Supports up to a maximum of 512 bytes of Input and Output data in each direction
- Powerful Master interface for AS-Interface eliminates the need for a PLC controller
- Optional control and status information added to the I/O data for diagnostic purposes
- Robust stand-alone housing for use in harsh industrial environments
- Global free technical support and consultancy
Descripción
The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and CC-Link networks.
FAST COPYING OF I/O DATA
The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Master on the AS-Interface network and as a Slave on the CC-Link network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.
EASY CONFIGURATION - NO PROGRAMMING REQUIRED!
The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.
AS-Interface Master Interface
An Anybus X-gateway with an integrated AS-Interface M4 Master interface can be used when there is no existing AS-Interface controlling PLC.
- Complies to AS-Interface 3.0 specification
- Controls up to 62 AS-Interface slaves
- Optional Live List of the active status of the connected slaves
- Supports Combined Transaction Types 1, 2, 3, 4 and 51
- Up to 248 digital inputs and 186 digital outputs
- Up to 124 (16-bit) analog values
- AS-Interface baudrate 167 kbit/s
- Synchronous I/O (optional)
- On-board configuration button
- 1x D-sub 9-pin male connector (RS-232) for terminal-based monitoring and configuration
- 2x 2-pin 5,08 Phoenix plug connectors
CC-Link Slave interface
CC-Link Slave settings can be made either via on-board switches, or by importing the provided .CSP file into engineering tool of the controlling PLC.
- Complete CC-Link slave Version 1 and 2 functionality
- CC-Link Conformance BTP-05027-B specification
- Transparent CC-Link communication (Standard Mode)
- PLC Profile compliant communication (PLC profile mode)
- Max. 896 bits/128 words (368 bytes) of I/O data in each direction
- Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
- Up to 4 occupied stations
- Up to 8 extension cycles (version 2 only)
- CC-Link configuration via on-board switches or via .CSP file
- 1x 5-pin, 5.08 Phoenix plug network connector
|
Order Code
|
AB7830
|
| Price group | B |
| Included components |
Resource CD, USB configuration cable, Quick start guide, manuals.
Anybus Configuration Manager software.
For bulk pack orders, all configuration software can be downloaded under
"files and documentation" from this website.
(Power supply not included)
|
| Optional Accessories |
*Extra wide DIN-clip for flat mounting (Order Code SP1784)
|
| Guarantee | 3 years |
