CP-132U-I PCI

Características destacadas

  • 2x RS422 / RS485
  • 32-bit universal PCI
  • Optical Isolation 2KV
  • Supports 64 Byte FIFO Driver
  • Embedded 16KV ESD protection
  • Support Automatic Data Direction Control (ADDC)
  • Built-in termination resistors
  • Compact board size (half-siz

Descripción

The CP-132 Universal PCI series is designed the new slot standard for expansion Boards and works with both 3.3V and 5.0V server slots.CP 132U offers two independent RS422 / 485, and each port can control up to 32 devices in a multidrop environment.

Application
Multiport data acquisition Factory automation Remote serial device control Industrial control Embedded industrial machine
Part Number747

Especificaciones Tecnicas

Specification
Hardware
I/O controller 2x 16C550C or compatible
Connector type Male DB9
Interface
Bus interface 32-bit Universal PCI, for 3.3V and 5.0V expansion Slots
Serial interface RS422 / 485
No. of ports 2
Signals RS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GNDRS485 Data+/-, GND
RS485 data control Auto (Automatic Data Direction Control) or by RTS
Built-in termination resistor RS422 120 OhmRS485 120 Ohm, jumper enable / disable
Performance
Speed 50 - 921.6 Kbps
Max. no. of ports 8 (4 boards)
Configuration
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ Assigned by BIOS
I/O address Assigned by BIOS
Power and Environment
Power requirement 580mA max.(+5V)
Operation temp. 0°C - 55°C
Dimension 120mm x 100mm
Isolation Protection 16KV ESD protection2 KV Optical Isolation
Operating Systems supported Vista, XP, Windows 2000, Windows NT, Windows 95/98/ME, Linux

Referencia Descripcion
747 747
Si continuas utilizando este sitio aceptas el uso de cookies. más información