WLg-LINK-OEM

Características destacadas

  • IEEE 802.11 a/b/g/h & super AG standards, up to 108 Mbps data rate
  • Security: WEP, WPA-PSK, WPA2-PSK and IEEE 802.1x (RADIUS)
  • Easy to use web based configuration
  • Auto-sensing 10/100 Base TX network interface (TTL or RJ45)
  • +3.3VDC or +5VDC power supply
  • Small sized PCB (L: 89 x W: 51 x H: 20 mm)

Descripción

When used in Access Point mode, the WLg-LINK-OEM is the root element of an industrial WiFi Ethernet network.
When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

 

The WLg-LINK-OEM device is also designed to work as a wireless bridge between the wired MODBUS/TCP protocol and the radio network, this feature allows connecting any MODBUS/TCP equipment to this network.

 

Integrators and manufacturers (point of sales, medical instrumentation, industrial automation, security systems, video surveillance, automotive, building automation ...) can right now rely on this new technology to safely build wireless network applications while freeing themselves from wiring constraints.

 

Topologies

 

Ordering information
    WLg-LINK-OEM-RJ   Access Point, Ethernet Bridge, repeater (WDS) module for wireless WiFi IEEE 802.11a/b/g/h & super AG, without antenna nor antenna cable, RJ45 Ethernet interface (per quantities only)    
    WLg-LINK-OEM-TTL   Access Point, Ethernet Bridge, repeater (WDS) module for wireless WiFi IEEE 802.11a/b/g/h & super AG, without antenna nor antenna cable, TTL Ethernet interface (per quantities only)    
    WL-KIT-ANT-1a   15 cm Hirose UFL cable with RSMA connector and bi-band 2.4 / 5 Ghz antenna (0 dBi)    
    WLg-LINK-OEM-EVAL   Contains both WLg-LINK-OEM-RJ PCB and the WL-KIT-ANT-1a antenna / cable kit / +5VDC power supply    
    WLg-RF400MW   High power radio option (26 dBm, 400 mW), requires the WLg-LINK-OEM module to be powered from a 3.3 VDC power source only    

Especificaciones Tecnicas

Ethernet link 10/100 Base TX Ethernet interface, RJ45 or TTL Ethernet interface (HE10 connector)
WiFi network Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip set.
Data rate Up to 108 Mbps (Super AG mode)
Channels 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Output power Transmitter +20 dBm (TPC)
Sensitivity Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
Antennas 2 Hirose UFL connectors enable to connect up to 2 antennas for diversity
Modulation OFDM : BPSK, QPSK, 16QAM, 64QAM DSSS : DBPSK, DQPSK, CCK
Security 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
Modes Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported
Administration Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM
Operating systems Windows, Linux, UNIX as well as any operating system supporting TCP/IP
Signaling LAN & WLAN activity on LEDs
Power supply From +3.3VDC or +5VDC power source on an HE10 connector
Consumption 3.5 Watts typical, 5 Watts maximum
Dimensions Small sized PCB L: 89 x W: 51 x H: 20 mm, 47 g
Environment Operating temperature: -20°C to +70°C, storage: -65 to +100°C Humidity: 5% to 95% (non-condensing), please consult us for the -40°C to +85°C range

Referencia Descripcion
WLg-LINK-OEM-RJ WLg-LINK-OEM Compact access point, Ethernet bridge & repeater (WDS)
WLg-LINK-OEM-TTL WLg-LINK-OEM Compact access point, Ethernet bridge & repeater (WDS)
Si continuas utilizando este sitio aceptas el uso de cookies. más información