WLn-LINK-OEM Ready-to-use compact 11n WiFi embedded module, access point, Ethernet bridge, repeater & Mesh point

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.

Características destacadas

  • Complete ready-to-use solution (access point, bridge, repeater, Mesh point) requiring no driver software
  • Small sized PCB (L: 103 x l: 57 x H: 20 mm)
  • WiFi IEEE 802.11a/b/g/n 3T3R & Gigabits LAN interfaces, radio bit rates up to 450 Mbps
  • Secure WiFi link
  • Available in industrial temperature range
  • Web based configuration, SNMP administration
  • Reduces TTM, design risk & cost
    Ethernet interface   1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, RJ45 or TTL Ethernet interface (HE10 connector)    
    Serial interface   One serial port (TTL level)    
    WiFi interface   1 radio IEEE 802.11 a/b/g/n, MIMO 3T3R, 2.4 / 5 Ghz    
    WiFi radio data rate   802.11a : 6, 9, 12, 18, 24, 36, 48 and 54 Mbps802.11b/g : 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps802.11n : MCS0-23, 3 streams (6.5 to 450 Mbps)    
    Operating frequencies   ISM : 2.4-2.483 GHz (up to 14 channels)UNII : 5.15-5.25 GHz (up 4 channels)UNII-2 : 5.25-5.35 GHz (up to 4 channels)UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)UNII-3 : 5.725-5.825 GHz (up to 4 channels)Supports DFS and TPC    
    Output power   Up to 24dBm (aggregate), depending on radio card model    
    Antennas   3 U.FL connectors    
    Security   IEEE 802.1x (RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, WEP    
    WiFi Modes   Access point, client, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, client router, WMM QoS, multicast, dynamic routing and firewall modes fully supported, fast roaming (less than 30 ms), redundancy (VRRP)    
    Administration   Built-in WEB interface, SNMP agent, administration software for Windows/Linux (ACKSYS NDM)    
    LEDs Signaling   Radio : quality and activity | Ethernet : link 10/100/1000 and activity | Power : on-off | Product diagnostic    
    Power supply   +5VDC (+/- 5%), 8 Watts typical    
    Dimensions & weight   Small sized PCB, L: 103 x l: 57 x H: 20 mm, approx. 50g    
    Standards   Radio module CE and FCC certified. WLn-LINK-OEM has to be certified in the final product.    
    Environment   Operating temperature: -20°C to +70°C or -40°C to +85°C (for extended temperature range model)Storage: -65°C to +100°C, Humidity: 5% to 95% (non-condensing)    
    Warranty   1 year    


WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.


More than just a radio adapter, WLn-LINK-OEM features a fully integrated IEEE 802.11a/b/g/n radio and a powerful PowerPC processor that provides a complete wireless connection (AP/brigde/repeater/Mesh) in a single small footprint.


WLn-LINK-OEM reduces the design time and eliminates the risk associated in wireless chipset based designs by providing all of the WiFi network protocols and processing needed to quickly implement embedded wireless solutions; its industrial-grade performance makes it ideally suited for harsh environments.


Integrators and manufacturers (rugged computers & instruments, intrinsically safe wireless devices, remotely operated vehicles UAV/UGV/UUV, automotive, COTS-based data communication units for military applications ...) can rely on this new technology to add wireless network features to their existing equipments.


Ordering information
    WLn-LINK-OEM-RJ/R   Access point, Ethernet bridge, repeater & Mesh point WiFi IEEE 802.11a/b/g/n module, without antenna nor antenna cable (MOQ = 10 units), RJ45 Ethernet interface, radio defined by the /R suffix    
    WLn-LINK-OEM-TTL/R   Same as above with TTL Ethernet Interface, radio defined by the /R suffix    
    WLn-LINK-OEM-EVAL/R   Evaluation kit containing the WLn-LINK-OEM-TTL module, an evaluation board, one WL-KIT-ANT-1a and a +12VDC power adapter (AC 110 / 240V), radio defined by the /R suffix   /R (radio) coding: No suffix = 250 mW radio, 3T3R, -20°C to +70°C           /3 = 250 mW radio, 3T3R, -40°C to +85°C    
    WL-KIT-ANT-1a   1 RF cable (15cm) with 1 bi-band 2.4 / 5 GHz omnidirectional antenna 2 dBi (RP-SMA connector)    
    C-Key_M2   Save / Restore configuration key for the WLn-LINK-OEM    
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí

¿Necesitas ayuda? Click

ayuda ER-Soft
Consulta a ER-Soft. *




* *Campos obligatorios.