Características destacadas
- 3 in 1 built-in serial interface : RS232/RS422/RS485
- Serial link up to 2 Mbps for RS422 & RS485 mode, 1 Mbps for RS232 mode
- Reliable error free communication even in case of EMI/RFI pertubations
- Fiber length up to 5000 m (100/140 µm fiber type), ST type connectors
- Automatic RS485 line turn-around, software independent
- Half-duplex & Full-duplex bidirectionnal data transmission
- Activity LED for fiber and copper TxD & RxD signals, error LED in case of fiber breakdown
- Wide DC power range, from +9VDC to +36VDC
- Point to point mode and multipoint redundant mode (fault tolerant for the RD300-OFR model)
- 15 KV ESD protection and HF filtering on the copper side
- Robust & compact metal case, CE standards, 35 mm Din Rail mounting
Descripción
Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
The optical fibre still offers other advantages : use without risk in an explosive environment, no EMC emission, no ground loops, immunity against lightning and high voltage environments, they are finally lighter, less cumbersome, inert and corrosion resistant ...
Plug & Play: RD300 features a self configuration mechanism based on a CPLD component that frees you from the tiresome operation which consists in the serial parameters setup, product is "Plug & Play".
RD300 features in standard a built-in system to control the fiber integrity, it reports automatically any failure with an error LED and also setups a relay contact (MOSFET) to activate any external safety device.
Its small size, design features and its great adaptability make the RD300 a really universal product capable to satisfy to major needs of the industry.
Topologies
Point to point topology
This configuration enables to control a single equipment installed in a very polluted or distant area. The optical line is totally insensitive to EMI/RFI perturbations.
Simple ring topology
This topology enables to build a simple ring whereas the master equipment is installed in the middle.
Single master bus topology
Each media converter device enables to connect to the network one or more slaves peripherals controlled by the master which governs exchanges using addressing sequences.
All the slaves equipments receive data transmitted by the master and answer are then received only by the master.
Dual master bus topology
By using this configuration, data transmitted by the "A" master are received by all the slave equipments and by the "B" master (backup station) as well.
The answers from slaves are received by all the slaves and by masters "A" & "B" as well.
Such configuration brings security to the application as the "B" master warrants the system to work even in case of master "A" failure or fiber breakdown.
Both "A" & "B" masters can be a single equipment with two independant serial ports.
Redundant ring (fault tolerant)
A single ring is used in this configuration but data are transmitted simultaneously on the two rings, this is a single master topology.
The master doesn't retransmit the data he receive in order to avoid infinite data loop.
In case of fiber breakdown, the equipments will still continue to receive data on the only line.
Dual ring & dual master topology
This topology should be used when an equipment needs to answer to different masters located on distinct networks.
The RD300-OFR device can also be used as a simple repeater or as a fiber optic converter to be compatible with other equipments.
Dual point to point network
This topology should be used when EMI/RFI perturbations concern only a part of the whole installation.
Redundancy provides a double security for the sensitive link.
Moreover, any fiber failure is reported on a LED and a relay contact (MOSFET) in activated.
Star topology
The device works as an RS485 network repeater and makes it possible also a star topology in a polluted environment.
Ordering information
| |
RD300-OFR
|
Serial RS232/RS422/RS485 to multimode fiber optic media converter, multipoint & fault tolerant, +9VDC to +36VDC power supply, din rail mounting
| |
