Anybus CompactCom B40 Brick - PROFIBUS

Anybus CompactCom B40 Brick - PROFIBUS

Anybus CompactCom B40 Brick - PROFIBUS
Protocolos: PROFIBUS

Características destacadas

  • A ready-made PROFIBUS connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • PNO pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 244 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.

Descripción

The Anybus CompactCom B40 for PROFIBUS is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFIBUS network.

ADD YOUR OWN CONNECTORS AND PERIPHERALS

The B40 Brick gives you the flexibility to add your own connectors and network isolation. An alternative is to use the ready-made connector board from HMS. The B40 Brick is ideal for device manufacturers who are looking for a semi-integrated solution where connector flexibility, size and cost are key elements.

ONE IN-DESIGN – ACCESS ALL NETWORKS

By implementing the B40 Brick into your product line, by simply switching to another brick and connector board, you can get connected to other B40 supported networks.

PROVEN AND TRUSTED

The B40 PROFIBUS Brick handles data lengths up to 488 bytes (244 bytes input and 244 output) and supports both PROFIBUS DP-V0 and DP-V1 according to IEC61158 type 3. The PROFIBUS network implementation is made directly into the CompactCom network processor — the award-winning Anybus NP40. With its fast data transfer and very low latency, it's the perfect match for even the most demanding industrial applications.

PROFIBUS Slave interface

  • Supports PROFIBUS DPV1 functionality
  •  Automatic baud rate detection
  • Generic and PROFIBUS specific diagnostic support
  • User Parameterization Data support
  • Set Slave Address support
  • ADI access via DP-V1 read/write services
  • Max 244 bytes Input and 244 bytes Output data
  • Device identity customization
  • Generic GSD file provided
  • Support for Modular Device Mode
ORDER CODE     AB6670 - B40 PROFIBUS Brick                    
ORDER CODE AB6663 - B40 Connector Board for PROFIBUS (Optional accessory) 

Especificaciones Tecnicas

Dimensions (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"
Operating temperature-40 to +85 °C or -40 to +185 °F
Power requirements3.3 VDC, +/- 0.15 VDC
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status.
ConnectorsNo: Add your own connectors (D-sub, 5.08, M12) - YES: via B40 connector board
Galvanic isolation No: Add your own isolation - YES: via B40 connector board
Mechanical ratingIP20, NEMA rating 1
MountingPCB fastening via B40 connector boards available from HMS
CertificationsCE, CULUS, RoHS

Referencia Descripcion
AB6670 Anybus CompactCom B40 Brick - PROFIBUS
Si continuas utilizando este sitio aceptas el uso de cookies. más información