IOL3400
Contact closure FO-System 1 x So IMPULSE Signal
The FO-system IOL3400 is used for the uni directional transmission of a S0 impulse output.
For the transmission of the impulse a simplex fiber optic cable is enough.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
Type | P-ST | H-ST | MM-ST | MM-SC | SM-ST | SM-SC | SM-E2 | ||
---|---|---|---|---|---|---|---|---|---|
Article no. IOL3400 | 03400 2301 | 03400 2312 | 03400 2321 | 03400 2323 | 03400 2331 | 03400 2333 | 03400 2335 | ||
FO-connector | ST | ST | ST | SC | ST | SC | E-2000 | ||
Fiber type | POF 980/1000 μm | HCS 200/230 μm | Multimode 62,5 (50)/125 μm | Singlemode 9/125 μm | |||||
Optical budget | 12 dB | 12 dB | 12 dB | 16 dB | |||||
FO range | 50 m (180 dB/km) | 200 m (8 dB/km) | 5 km (1 dB/km) | 30 km, others up to 100 km on request (0,3 dB/km) | |||||
Wavelength | 650 nm | 850 nm | 1310 nm | 1310 nm | |||||
Signal input | acc. to EN62053-31, Class A or Class B depending on IOL-3400 Power supply | ||||||||
Signal output | acc. to EN62053-31 | ||||||||
Cable length | 1 m | ||||||||
Fehlerrelais | 24 VDC (1A) / 60 VDC (0,3 A) | ||||||||
Status-LEDs | Power supply (green) / Data (yellow) / Status (red) | ||||||||
Power supply | 12–30 VDC | ||||||||
Power consumption | 2,5 Watts, 100 mA (24 V) | ||||||||
Operating temperature | –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others) | ||||||||
EMC | EN61000-6-2 / EN55022 Class B + A1 + A2 | ||||||||
Weight | 150 g | ||||||||
Dimensions | 22,5 x 93 x 82 mm | ||||||||
Housing | Polyamid, black |
Referencia | Descripcion |
---|---|
IOL3400 | Contact closure FO-System 1 x So IMPULSE Signal |
Documentacion | Datasheet |