DL LWV

Características destacadas

  • Media Converter
  • Protocol Transparent
  • Optical Amplifier
  • Koppler

Descripción

The fiber optic system DL LWV works as amplifier and media converter for several fiber optic transmission networks.

Less optical power requires amplification. Different fiber types within one application need conversion. The system DL LWV offers various possibilities, corresponding to these requirements.

The system contains fiber optic receiver and transmitter components. The incoming signal is electrically processed and then coupled back into the fiber optic cable via the transmitter. With the aid of this intermediate amplifier the line length is unlimited using various fiber types as for instance: POF, HCS, multimode or singlemode fiber optic cable.

LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.

Please note that the adjoining chart just covers a small selection of our product range. In general, any combination of fiber type, wavelength and bandwidth is available. The columns are marked with F1 up to F16 for the types of fiber.

Especificaciones Tecnicas

Type F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
FO-connector HP VL HP VL ST SMA ST SMA ST SC ST SC SC BIDI E-2000 ST SC SC BIDI E-2000
Fiber type POF
980/1000 μm
POF
980/1000 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 29 dB 12 dB 12 dB 12 dB 12 dB 8 (4,2) dB 12 dB 16 dB
Data rate max. 57,6
KBit/s
10
MBit/s
5
MBit/s
100
MBit/s
5
MBit/s
100
MBit/s
100
MBit/s
FO range 150 m 40 m 40 m 2,6 (1,4) km 5 km 30 km, others up to 100 km on request
Faserdämpfung 180 dB/km 3 dB/km 1 dB/km 0,3 dB/km
Wavelength 650 nm 820 nm 1310 nm 1310 nm
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 500 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

Referencia Descripcion
DL LWV Media converter and optical Amplifier
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información