DL422
Características destacadas
- RS485
- Profibus
- Redundant
- FiberView
Descripción
The fiber optic systems DL422 connect applications with a RS422 interface via fiber optics.
With the help of this innovative system optical bus, star, tree and mixed structures are possible.
LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Especificaciones Tecnicas
Type | P-ST | H-ST | MM-ST | MM-SC | MM-SC/BIDI | SM-ST | SM-SC | SM-E2 | SM-SC/BIDI |
---|---|---|---|---|---|---|---|---|---|
Article no. DL422 | 01000 2101 | 01000 2112 | 01000 2121 | 01000 2123 | 01000 2123-BIDI A 2123-BIDI B | 01000 2131 | 01000 2133 | 01000 2135 | 01000 2133-BIDI A 2133-BIDI B |
Article no. DL422-2x | 01000 2151 | 01000 2162 | 01000 2171 | 01000 2173 | 01000 2173-BIDI | 01000 2181 | 01000 2183 | 01000 2185 | 01000 2183-BIDI |
FO-connector | ST | ST | ST | SC | SC | ST | SC | E-2000 | SC |
Fiber type | POF 980/1000 μm | HCS 200/230 μm | Multimode 62,5 (50)/125 μm | Singlemode 9/125 μm | |||||
Optical budget | 12 dB | 12 dB | 12 dB | 16 dB | |||||
FO range | 50 m (180 dB/km) | 200 m (8 dB/km) | 5 km (1 dB/km) | 30 km, others up to 100 km on request (0,3 dB/km) | |||||
Wavelength | 650 nm | 850 nm | 1310 nm | 1310 nm 1550 nm | 1310 nm | 1310 nm 1550 nm | |||
Data rate max. | Point-to-point structure: 1.5 MBit/s max. / Line topology: 1.5 MBit/s divided by no. of DL422 systems | ||||||||
Transmission type | Duplex, Half duplex at DL422-2x | ||||||||
Terminating resistor | Switchable: none or wave impedance (Rw + Rpd + Rpu) | ||||||||
RS422 Cable length | 50 m | ||||||||
RS422 Connector | 9-pole Sub-D female and 6-pole terminal | ||||||||
Status-LEDs | Power supply (green) / Data (yellow) / Status (red) | ||||||||
Power supply | 12–30 VDC, other voltages on request | ||||||||
Power consumption | 5 Watts, 200 mA (24 V) | ||||||||
Potential separation | 500 VDC (24 VDC |
Referencia | Descripcion |
---|---|
DL422 | RS422-FO-SYSTEM PROTOCOL TRANSPARENT |
Documentacion | Datasheet |