USB-to-CAN V2
Características destacadas
- Cost-effective and extremely versatile
- Common driver interface for easy exchange of the PC interface type
- For industrial and automotive applications
- Galvanic isolation optional
Descripción
Active USB interface
2 x CAN (High-/Low-Speed), LIN
With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addressed by the USB-to-CAN V2 – in both the industrial and the automotive sectors.
High performance and flexibility
By using powerful hardware and connecting over USB 2.0 Hi-Speed (480 MBit/sec), the USB-to-CAN V2 interfaces achieve very high data throughput with minimum latency and low power consumption. This allows them to provide the reliable, loss-free transmission and receipt of messages in CAN networks at high transmission rates and bus load. The messages are also timestamped and can be filtered and buffered directly in the USB-to-CAN V2.
Due to its extremely interesting price and compact size, the USB-to-CAN V2 interface is ideal for use in series products and in combination with the canAnalyser for development, service, and maintenance tasks.
Its newly developed, rugged housing permits easy customer-specific adaptation (custom design / brand labeling).
All USB-to-CAN V2 variants are supported by the IXXAT driver packages and higher layer protocol APIs as well as by the IXXAT tool suite. A detailed software support overview can be found here.
Technical specifications
PC bus interface | USB 2.0, Hi-Speed |
Microcontroller | 32 bit |
CAN controller | Internal; CAN 2.0 A/B |
CAN baudrates | 10 kBit/s ... 1 Mbit/s |
CAN high-speed transceiver | TI SN65HVD251D |
CAN low-speed transceiver (1) | TJA1055T |
LIN transceiver (1) | TJA1020 |
LIN protocol (1) | V1.3 and V2.0 |
LIN baudrate (1) | max. 20 kBaud |
Galvanic isolation | optional, 1 kV, 1 sec. |
Power supply | 5 V, max. 500 mA via USB port |
Temperature range | -20°C ... 70°C |
Fieldbus connection | according to CiA 303-1 |
Certification | CE, EN 55022:2010, EN61000-6-1:2007 |
(1) only available in USB-to-CAN V2 automotive
Contents of delivery
- USB-to-CAN V2 interface in the compact, embedded, professional, or automotive variant
- 2 x RJ45 to Sub-D9 adapter cable (only USB-to-CAN V2 professional/automotive)
- Manual
- CAN driver VCI for Windows XP, Windows 7, Windows 8
- Simple "miniMon" CAN bus monitor
Order numbers / variants
Variants / Features |
CAN HS ports |
CAN LS ports |
LIN ports |
Fieldbus galv. isolated |
D-SUB 9 |
RJ45 |
Order number |
compact | 1 |
X |
X |
1.01.0281.12001 |
|||
1 |
X |
X |
1.01.0281.12002 |
||||
1 |
X |
1.01.0281.11001 |
|||||
embedded (1) | 1 |
X |
X |
1.01.0282.12001 |
|||
professional | 2 |
X |
X (incl. D-SUB 9 adapter cable) |
1.01.0283.22002 |
|||
automotive | 2 (2) |
1 |
1 (3) |
X |
X (incl. D-SUB 9 adapter cable) |
1.01.0283.22042 |
(1) PC installation via slot board and internal USB cable
(2) One channel via software between ISO11898-2 and ISO11898-3 switchable
(3) LIN master / slave mode via software switchable
Especificaciones Tecnicas
PC bus interface | USB 2.0, Hi-Speed |
Microcontroller | 32 bit |
CAN controller | Internal; CAN 2.0 A/B |
CAN baudrates | 10 kBit/s ... 1 Mbit/s |
CAN high-speed transceiver | TI SN65HVD251D |
CAN low-speed transceiver (1) | TJA1055T |
LIN transceiver (1) | TJA1020 |
LIN protocol (1) | V1.3 and V2.0 |
LIN baudrate (1) | max. 20 kBaud |
Galvanic isolation | optional, 1 kV, 1 sec. |
Power supply | 5 V, max. 500 mA via USB port |
Temperature range | -20°C ... 70°C |
Fieldbus connection | according to CiA 303-1 |
Certification | CE, EN 55022:2010, EN61000-6-1:2007 |
Referencia | Descripcion |
---|---|
1.01.0281.12001 | USB-to-CAN V2 Active USB interface |
1.01.0281.12002 | USB-to-CAN V2 Active USB interface |
1.01.0281.11001 | USB-to-CAN V2 Active USB interface |
1.01.0282.12001 | USB-to-CAN V2 Active USB interface |
1.01.0283.22002 | USB-to-CAN V2 Active USB interface |
1.01.0283.22042 | USB-to-CAN V2 Active USB interface |
Documentacion | Dsatasheet |