IXXAT Econ 100

Características destacadas

  • Powerful ARM-based platform with Linux operating system and passive cooling
  • High communication performance for real-time applications
  • Easy programming using Soft-PLC or Application Development Kits
  • Highly customizable to meet the requirements of your application
  • Easily expandable to support various fieldbus and industrial Ethernet protocols (expansion board)
  • Out-of-the-box: EtherCAT and CANopen master
  • Also available as OEM and board-level product

Descripción

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devices to complex robot-based systems.


How it works

During the development of the IXXAT Econ 100 special attention was paid to the requirements of the various fields of application. Thus, the device has a powerful CPU, industry-grade memory, a rugged metal casing as well as a fanless design with an extended temperature range of -40 °C to +70 °C.

IXXAT Econ 100 uses a dual-core Cortex A9 CPU. The internal RAM has a standard size of 256 MB. Operating system and programs are stored on flash memory on a SD card.





The basic version of the device has each two Ethernet, CAN and USB interfaces. Expansion of interfaces and functionality is provided by HMS as customized development service.

The unique modular concept of the IXXAT Econ 100 enables you to easily extend the existing interfaces and functions, allowing to adapt the device to your specific requirements. Customized gateway and control solutions can therefore be swiftly and easily implemented for a variety of different fieldbus and industrial Ethernet standards.

 

Out-of-the-Box Variants

HMS offers software packages making the IXXAT Econ 100 an out-of-the-box master for EtherCAT and CANopen.

EtherCAT
For the EtherCAT master functionality the proven EtherCAT Master protocol software from acontis is used. The specially optimized link layer enables the IXXAT Econ 100 to operate with cycle times of less than 1 ms.

The selected EtherCAT master implementation, the included interface drivers and the pre-installed Linux operating system enable rapid implementation of customized EtherCAT application as well as the rapid adaption of existing applications to the compact and powerful IXXAT Econ 100.

The IXXAT Econ 100 is also a perfect solution for the connection of several EtherCAT networks, e.g. enabling the operation as EtherCAT master in one system and at the same time as EtherCAT slave in another network.

CANopen
For the integration into CANopen networks IXXAT offers a customized multi-channel variant of the proven IXXAT CANopen master/slave software. This allows the rapid implementation of controllers for CANopen networks, as well as the use of IXXAT Econ 100 as gateway or measurement node.

Technical specifications

CPU Xilinx Zynq SoC - Dual-Core Cortex A9 CPU with integrated FPGA of the Artix 7 Family
CPU clock frequency 667 MHz
FPGA (within CPU) 28 k logic cells
Memory 256 MB DDR-RAM
Flash 256 MB SD card (industrial grade: optional
up to 32 GB)
Operating system Linux
On-board interfaces - 1 x 1000/100/10 MBit LAN
- 1 x 100/10 MBit LAN (e.g. EtherCAT Master)
- 2 x CAN High-Speed, galvanic isolated
- optional: 1 x RS232 interface, instead of 1 x CAN
Cooling Passive
Environment temperature -40 °C to +70 °C
Power supply  9-32 V, 2-pin Phoenix Contact connector
Power consumption 4-5 watt, depending on FPGA use
Housing Steel
Protection class IP20
Mounting DIN rail mounting with integrated DIN rail clip or Desktop Case (no clip)
Dimensions 72 x 154 x 105 mm
Weight 900 g

 

Order numbers

1.01.0271.00051 IXXAT Econ 100
1.02.0271.10003 CANopen Software for IXXAT Econ
1.02.0271.00003 Runtime license: CANopen Master for IXXAT Econ 100; required for each Econ 100
1.24.0271.10002 EtherCAT Master Class A Software for IXXAT Econ
1.24.0271.00002 Runtime license: EtherCAT Master Class A for IXXAT Econ 100; required for each Econ 100
1.24.0271.10001 EtherCAT Master Class B Software for IXXAT Econ
1.24.0271.00001 Runtime license: EtherCAT Master Class B for IXXAT Econ 100; required for each Econ 100

 

Related products

Especificaciones Tecnicas

CPU Xilinx Zynq SoC - Dual-Core Cortex A9 CPU with integrated FPGA of the Artix 7 Family
CPU clock frequency 667 MHz
FPGA (within CPU) 28 k logic cells
Memory 256 MB DDR-RAM
Flash 256 MB SD card (industrial grade: optional up to 32 GB)
Operating system Linux
On-board interfaces - 1 x 1000/100/10 MBit LAN - 1 x 100/10 MBit LAN (e.g. EtherCAT Master) - 2 x CAN High-Speed, galvanic isolated - optional: 1 x RS232 interface, instead of 1 x CAN
Cooling Passive
Environment temperature -40 °C to +70 °C
Power supply 9-32 V, 2-pin Phoenix Contact connector
Power consumption 4-5 watt, depending on FPGA use
Housing Steel
Protection class IP20
Mounting DIN rail mounting with integrated DIN rail clip or Desktop Case (no clip)
Dimensions 72 x 154 x 105 mm
Weight 900 g

Referencia Descripcion
1.01.0271.00051 IXXAT Econ 100
1.02.0271.10003 IXXAT Econ 100
1.02.0271.00003 IXXAT Econ 100
1.24.0271.10002 IXXAT Econ 100
1.24.0271.00002 IXXAT Econ 100
1.24.0271.10001 IXXAT Econ 100
1.24.0271.00001 IXXAT Econ 100
Si continuas utilizando este sitio aceptas el uso de cookies. más información