SAE J1939 Protocol Software

SAE J1939 Protocol Software

SAE J1939 Protocol Software
Categorías: Software
Protocolos: J1939

Características destacadas

  • Developed according to MISRA-C:2012
  • Tested against the compliance specification SAE J1939-82
  • Suitable for the use with as well as without a real-time operating system
  • Transmission and reception of application-specific messages (confirmed and unconfirmed)
  • Support of the J1939 transport protocols:
    - BAM (for broadcast communication)
    - RTS/CTS (for peer-to-peer communication)
    - Simultaneous communication with more than one node
  • Provides the address claiming procedure for single- and multi-address capable CAs
  • Cyclic transmission and reception of messages with timeout monitoring
  • Provides layer 2 communication (e.g. for ISO15765-3 message or proprietary J1939 messages with 11 bit identifiers)
  • Support of request messages
  • Modular design (not required features can be skipped to reduce memory requirements)
  • The protocol software is dynamically configurable at runtime
  • With the J1939 Designer the protocol software can be easily configured exactly to the needs of the application via a graphical user interface

Descripción

Software package for the development of J1939 Devices

Cross-platform protocol software in accordance with SAE J1939. Combined with the SAE J1939 CAN driver, the protocol software allows quick and easy development of J1939 devices.


How it works

The SAE J1939 protocol software enables the quick and simple development of SAE J1939 devices. All communication mechanisms defined in the SAE J1939 specification (except for the bridge functionality) are available, which means that developers can fully concentrate on their application.


As the user interface is designed as a universal functional interface, the protocol software is simultaneously the basis for extensions such as Diagnostics (SAE J1939/73), NMEA 2000 or ISO 11783 (ISOBUS).

The J1939 protocol software is implemented in ANSI-C and is independent of the CAN controller, CPU and operating system (where available). It is adapted to the hardware via the CAN driver package, which is required in addition.

The user manual, API description and demo applications supplied allow a quick start-up of the SAE J1939 protocol software.

Versions of the SAE J1939 protocol software

Two versions of the SAE J1939 protocol software are available:

The "single channel" version is optimized for the use of just one software instance (CAN channel) and is therefore very good suited for low end CPUs (8 or 16 bit) with limited memory and only one CAN controller.  Requirement for the purchase of the J1939 protocol software is the purchase of the IXXAT J1939 CAN driver (1.02.0350.00TTT).

The "multi-channel" version supports several software instances, whereby each instance can use a different CAN channel as well as all instances can use the same CAN channel (Virtual Mode). Requirement for the purchase of the J1939 protocol software is the purchase of the IXXAT J1939 CAN driver (1.02.0350.00TTT).

Contents of delivery

  • SAE J1939 protocol software as source code (The "CAN Driver", which is required for operation,
    is not part of the delivery and must be ordered separate.)
  • Manual as PDF
  • Inteface description in HTML
  • Sample programs in C
  • Product or product line license
  • SAE J1939 Designer (30 days evaluation license)
  • Technical support

 

Further services

(not included in contents of delivery)

  • Maintenance contract
    HMS offers a maintenance contract to supplement the J1939 software package. The maintenance contract includes the following services during the contractual period:
    - Free updates and troubleshooting
    - Technical support

  • Introduction to the code
    One-day introduction to the SAE J1939 software code. Interfaces, processes and data flows are explained. Direct questions concerning the adaptation to be carried out can also be answered and adaptations to the code can be made.

Order number

1.02.0351.x0000 SAE J1939 Protocol Software - Single Channel (CAN Driver 1.02.0350.00TTT required for operation)
1.02.0351.x0001 SAE J1939 Protocol Software - Multi Channel (CAN Driver 1.02.0350.00TTT required for operation)

 

Related products

Especificaciones Tecnicas

Referencia Descripcion
1.02.0351.x0000 SAE J1939 Protocol Software
1.02.0351.x0001 SAE J1939 Protocol Software
Si continuas utilizando este sitio aceptas el uso de cookies. más información