Cod: NB1600-LW-G - Nombre: NB1600 Mobile & WLAN

NetModule
The NB1600 WIAP supports multiple wireless networks (WLAN-Hotspots) and fast Internet via 2G-3G-4G-

NB1600 Mobile & WLAN Combined UMTS/LTE and WLAN router with optional GPS

The NB1600 WIAP supports multiple wireless networks and connects them to the Internet via 2G/3G or 2G/3G/4G. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

Características destacadas

  • Cellular communication 2G/3G/4G
  • WiFi b/g/n
  • VPN client or access point
  • SMS send and control
  • Remote management
  • Powerfull software
  • Programmability
Mobile / CellularMultimode LTE, UMTS and GSM module LTE/4G FDD Bands: B1(2100), B2(1900), B3(1800), B5(850), B7(2600), B8(900), B20(800) DC-HSPA+/UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: LTE max. 100 Mbps downlink / 50 Mbps uplink (DC-HSPA+ 42/5.76) - or - Multimode UMTS and GSM module UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink Antenna connector: 1-2 SMA female
GNSSGPS receiver with NMEA 0183 data stream, tracking sensitivity -154 dBm (typical) Antenna connector: SMA female, support for active and passive antennas
WLAN / WiFiIEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO Access Point or Client Max users in access point mode: WPA: 54, WPA2: 110 Antenna connector: SMA female, supporting one or two antennas
Digital I/O 2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC 2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W Connector: 8 pins of 15-pin terminal block
Ethernet2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed, RJ45
USBUSB Host interface, type A
SerialProtocol: 3-wire RS232 Connector type: 3 pins of 15-pin terminal block
PowerRedundant power supply inputs Input voltage: 12V DC to 48V DC (-15% / +20%) Max. power consumption: 5W Connector type: 2+2 pins of 15-pin terminal block
Dimensions124.2mm x 45mm x 110mm, ca. 450g
EnvironmentTemperature range: -25 °C to +70 °C Ingress Protection Rating: IP40; MTBF: 142'000h
Safety StandardsEN60950-1:2006
EMC StandardsEN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission) EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
Type ApprovalsCE according to directive 1995/5/EC (R&TTE) FCC according to 47 CFR, Part 15
Order numbers: NB1600-UW-G NB1600-LW NB1600-LW-G(contact sales for more models, options or project specific adaptations) UMTS, WLAN Router + GPS LTE, WLAN Router LTE, WLAN Router + GPS
The NB1600 WIAP supports multiple wireless networks and connects them to the Internet via 2G/3G or 2G/3G/4G. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

The Wireless Internet Access Point (WIAP) provides wireless internet access for other devices. With the Multi-SSID function several separated WiFi networks can be operated at the same time.
In multi-WAN configuration, the device operates as a least cost router with automatic fall back in case of a failure. In this case the WiFi interface is configured as a client and one Ethernet port is connected to a local network.

The integrated GPS recevier allows you to locate the position of the device with a high accuracy or to use the GPS signal as the time base. Integrating into map services like Google Maps allows you to track the device if it's mounted in moving equipment.

In its role as device server the NB1600 converts both, the serial and the USB interface to IP, enableing remote access to these interfaces. Any PC with IP connection to the router can use the remote USB or RS-232 device as if it was directly connected. This setup allows using the original driver.
Digital I/Os can be configured by local or remote devices. Based on input port state changes, applications can be informed and e.g. an SMS is sent to a group of numbers.

The SDK allows users programing the NB1600 using a simple script and implementing all kind of applications. Preprocessing can be done directly on the router, thus saving an additional IPC.

Other features and services are DHCP server, DNS proxy, Dynamic DNS Agent, SNMP agent, Telnet server, SSH server, Web server, e-mail and SMS. The router is operated by the Web Manager or via command line.
Firmware and configuration updates can be easily performed from remote in a fail-safe manner. The SNMP interface allows integration of the Router in a network management system for supervision.

Applications
  • Condition monitoring
  • Remote management
  • Telemetry
  • Digital signage
  • CCTV
  • Vending machines
  • ATMs
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X