Características técnicas:
|
Ethernet link
|
Gigabit 10/100/1000 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX crossover
|
WiFi network
|
Compliant to the IEEE 802.11a/b/g/n MIMO 3T3R, 2.4 / 5 / 5.4 GHz standards
|
Radio data rate
|
300 Mbps
|
Radio channels
|
2.4 GHz (802.11b/g/n): 14 channels / 5 GHz (801.11a/h/n): 24 channels
|
Output power
|
Transmitter +20 dBm (TPC)
|
Sensitivity
|
Receiver -92 dBm for IEEE 802.11 a/g/n and -95 dBm for IEEE 802.11b
|
Antennas connections
|
Up to three 2.4 / 5 GHz MIMO antennas, RP-SMA type connectors
|
Modulation
|
OFDM: BPSK, QPSK, 16QAM, 64QAM / DSSS: DBPSK, DQPSK, CCK
|
Security
|
64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering,
SSID broadcast control
|
Modes
|
Access point to build a WiFi network infrastructure, bridge to connect any Ethernet equipments to this network, MODBUS/TCP
wireless gateway, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, bridge router, fast roaming (less than 30 ms single
channel), redundancy (VRRP), WMM QoS, multicast and IGMP-Snooping modes are fully supported.
|
Administration
|
Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM
|
Operating systems
|
Windows, Linux, UNIX as well as any operating system supporting TCP/IP
|
Signaling
|
LEDs signaling for radio quality, activity and status, Link 10/100/1000 and activity for the LAN port
|
Power supply
|
DC power supply (+9VDC to +36VDC), terminal block inside the enclosure
|
Consumption
|
10W typical power consumption
|
Dimensions & weight
|
Shockproof rugged aluminum enclosure, (L: 185 x W: 64 x H: 35 mm), 450 g with the cable and without the antennas
|
Standards
|
MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP66 seal rating EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)
|
Environment
|
Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +85°C
|