CAN Repeater

Características destacadas

  • Signal conversion between High- and Low-Speed CAN
  • Cost savings due to simple wiring
  • Increased system reliability
  • Almost no influence on real-time behavior

Descripción

ISO 11898-2 CAN repeater
with low-speed option

The CAN Repeater is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. One special feature of the Repeater is that it separates a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

Alternative, the Repeater can be equipped with a low-speed bus interface (ISO 11898-3), allowing the operation as high/low-speed converter. Its galvanic isolation isolates both CAN segments from each other as well as from the power supply.


Technical specifications

Display Transmit (2 green LEDs), defective segment (2 red LEDs)
CAN bus interface ISO 11898-2 with CAN choke. Screw terminals. CAN termination resistors are integrated (switchable).
Baudrate Up to 888 kbps
Delay 200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply 9-35 V DC, 1.5 W typ., through terminals
Galvanic isolation 1 kV, 1 sec.; CAN 1, CAN 2 and power supply are galvanic isolated against each other.
Certification CE
Temperature range  -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 110 x 75 x 22 mm

 

Contents of delivery

  • CAN-Repeater, Quick reference
 

Order number

1.01.0064.44000 CAN-Repeater (2 x ISO 11898-2) with galvanic isolation
1.01.0064.46000 CAN-Repeater (ISO 11898-2 to ISO 11898-3) with galvanic isolation

 

Related products

Especificaciones Tecnicas

Display Transmit (2 green LEDs), defective segment (2 red LEDs)
CAN bus interface ISO 11898-2 with CAN choke. Screw terminals. CAN termination resistors are integrated (switchable).
Baudrate Up to 888 kbps
Delay 200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply 9-35 V DC, 1.5 W typ., through terminals
Galvanic isolation 1 kV, 1 sec.; CAN 1, CAN 2 and power supply are galvanic isolated against each other.
Certification CE
Temperature range -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 110 x 75 x 22 mm

Referencia Descripcion
1.01.0064.44000 CAN Repeater
1.01.0064.46000 CAN Repeater
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información