USB-to-CAN V2

Características destacadas

  • Cost-effective and extremely versatile
  • Common driver interface for easy exchange of the PC interface type
  • For industrial and automotive applications
  • Galvanic isolation optional

Descripción

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addressed by the USB-to-CAN V2 – in both the industrial and the automotive sectors.


High performance and flexibility

By using powerful hardware and connecting over USB 2.0 Hi-Speed (480 MBit/sec), the USB-to-CAN V2 interfaces achieve very high data throughput with minimum latency and low power consumption. This allows them to provide the reliable, loss-free transmission and receipt of messages in CAN networks at high transmission rates and bus load. The messages are also timestamped and can be filtered and buffered directly in the USB-to-CAN V2.

Due to its extremely interesting price and compact size, the USB-to-CAN V2 interface is ideal for use in series products and in combination with the canAnalyser for development, service, and maintenance tasks.

Its newly developed, rugged housing permits easy customer-specific adaptation (custom design / brand labeling).

All USB-to-CAN V2 variants are supported by the IXXAT driver packages and higher layer protocol APIs as well as by the IXXAT tool suite. A detailed software support overview can be found  here.

Technical specifications

PC bus interface USB 2.0, Hi-Speed
Microcontroller 32 bit
CAN controller Internal; CAN 2.0 A/B
CAN baudrates 10 kBit/s ... 1 Mbit/s
CAN high-speed transceiver TI SN65HVD251D
CAN low-speed transceiver (1) TJA1055T
LIN transceiver (1) TJA1020
LIN protocol (1) V1.3 and V2.0
LIN baudrate (1) max. 20 kBaud
Galvanic isolation optional, 1 kV, 1 sec.
Power supply 5 V, max. 500 mA via USB port
Temperature range -20°C ... 70°C
Fieldbus connection according to CiA 303-1
Certification CE, EN 55022:2010, EN61000-6-1:2007

 
(1) only available in USB-to-CAN V2 automotive

 

Contents of delivery

  • USB-to-CAN V2 interface in the compact, embedded, professional, or automotive variant
  • 2 x RJ45 to Sub-D9 adapter cable (only USB-to-CAN V2 professional/automotive)
  • Manual
  • CAN driver VCI for Windows XP, Windows 7, Windows 8
  • Simple "miniMon" CAN bus monitor
 

 

Order numbers / variants

Variants /
Features
CAN
HS
ports
CAN
LS
ports
LIN ports
Fieldbus
galv.
isolated
D-SUB
9
RJ45
Order number
compact 1


X
X

1.01.0281.12001
1


X

X
1.01.0281.12002
1



X

1.01.0281.11001
embedded (1) 1


X
X

1.01.0282.12001
professional 2


X

X
(incl. D-SUB 9
adapter cable)
1.01.0283.22002
automotive 2 (2)
1
1 (3)
X

X
(incl. D-SUB 9
adapter cable)
1.01.0283.22042

 
(1) PC installation via slot board and internal USB cable
(2) One channel via software between ISO11898-2 and ISO11898-3 switchable
(3) LIN master / slave mode via software switchable

Related products

Especificaciones Tecnicas

PC bus interface USB 2.0, Hi-Speed
Microcontroller 32 bit
CAN controller Internal; CAN 2.0 A/B
CAN baudrates 10 kBit/s ... 1 Mbit/s
CAN high-speed transceiver TI SN65HVD251D
CAN low-speed transceiver (1) TJA1055T
LIN transceiver (1) TJA1020
LIN protocol (1) V1.3 and V2.0
LIN baudrate (1) max. 20 kBaud
Galvanic isolation optional, 1 kV, 1 sec.
Power supply 5 V, max. 500 mA via USB port
Temperature range -20°C ... 70°C
Fieldbus connection according to CiA 303-1
Certification CE, EN 55022:2010, EN61000-6-1:2007

Referencia Descripcion
1.01.0281.12001 USB-to-CAN V2 Active USB interface
1.01.0281.12002 USB-to-CAN V2 Active USB interface
1.01.0281.11001 USB-to-CAN V2 Active USB interface
1.01.0282.12001 USB-to-CAN V2 Active USB interface
1.01.0283.22002 USB-to-CAN V2 Active USB interface
1.01.0283.22042 USB-to-CAN V2 Active USB interface
Documentacion Dsatasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información