Productos inalámbricos y robustos para aplicaciones industriales, trenes o vehículos
ER-Soft

Productos inalámbricos y robustos para aplicaciones industriales, trenes o vehículos


Productos inalámbricos WiFi, Bluetooth, 2G, 3G, 4G y robustos para aplicaciones industriales, trenes o vehículos para distintos buses de campo que funcionan como puntos de acceso, punto a punto, puente, etc…


NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-L-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.
  • EN50155 TX / EN45545
  • LTE/UMTS modem
  • WiFi AP/client
  • 5 Ethernet M12
  • 2 digital I/O
  • OpenVPN, IPsec, QoS
  • Options: SIP-to-GSM gateway
  • Isolated power
  • Option: extended input voltage range 72, 96, 110V
Mobile / Cellular1-2 Multimode LTE, UMTS and GSM modules LTE/4G FDD Bands: B1(2100), B2(1900), B3(1800), B5(850), B7(2600), B8(900), B20(800) DC-HSPA+/UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: LTE max. 100 Mbps downlink / 50 Mbps uplink (DC-HSPA+ 42/5.76) - or - Multimode UMTS and GSM module UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink Antenna connector: 1-2 TNC female SIM slots: 2 Mini-SIM ISO/IEC 7810:2003, ID-000
WLAN / WiFiIEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO, access point or client Antenna connector: TNC female, supporting one or two antennas
Ethernet 5 port Ethernet switch 10/100 Mbps, auto MDX, M12 connector 4 poles D-coded female
GPSGPS receiver with NMEA 0183 data stream, tracking sensitivity -154 dBm (typical) Antenna connector: TNC female, support for active and passive antennas
USBUSB 2.0 host interface, Connector type: USB A
Serial Protocol: 1 x RS232 DCE interface instead of digital I/O port Connector type: M12, 4 poles, D-coded female
Digital I/O2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC 2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W Connector: M12 8 poles A-coded female
PowerStandard - Nominal voltages: 24VDC, 36VDC and 48VDC according to EN50155; Voltage range 12VDC to 60VDC, -15% / +5% Option - Nominal voltages: 72VDC, 96VDC and 110VDC according to EN50155; Voltage range 50VDC to 136VDC, ±10% Max. power consumption: 15W Compliant with EN50155 class S2/C1: interruptions up to 10ms are tolerated, no batteries Connector type: M12, 4 poles, A-coded male, Pin1 +, Pin3 -
EnvironmentOperational temperature: -40 °C to +70 °C; Storage temperature: -40 °C to +85°C Conformal coating, IP40 with SIM / USB cover mounted, IP52 option
Dimensions, weightWidth 190mm x height 86mm x depth 104mm, approx. 1'100g
MTBF117'000h-296'000h depending on model
EMC standardsEN 55022:2010, EN 61000-6-2:2005, EN 50121-3-2:2006 (Emission) EN 55024:2010, EN 50121-3-2:2006, EN 50121-4:2006 (Immunity)
Type ApprovalCE according to R&TTE Railway: EN50155, EN 45545-2
Order numbers NB3700-U NB3700-U-G NB3700-UW-G NB3700-L-G NB3700-LW-G NB3700-LWPb-G(contact sales for more models, options or project specific adaptations) UMTS Router UMTS Router + GPS UMTS, WLAN Router + GPS LTE Router + GPS LTE, WLAN Router + GPS LTE, WLAN Router + 70, 96, 110V PSE + GPS

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-LW-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.
  • EN50155 TX / EN45545
  • LTE/UMTS modem
  • WiFi AP/client
  • 5 Ethernet M12
  • 2 digital I/O
  • OpenVPN, IPsec, QoS
  • Options: SIP-to-GSM gateway
  • Isolated power
  • Option: extended input voltage range 72, 96, 110V
Mobile / Cellular1-2 Multimode LTE, UMTS and GSM modules LTE/4G FDD Bands: B1(2100), B2(1900), B3(1800), B5(850), B7(2600), B8(900), B20(800) DC-HSPA+/UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: LTE max. 100 Mbps downlink / 50 Mbps uplink (DC-HSPA+ 42/5.76) - or - Multimode UMTS and GSM module UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink Antenna connector: 1-2 TNC female SIM slots: 2 Mini-SIM ISO/IEC 7810:2003, ID-000
WLAN / WiFiIEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO, access point or client Antenna connector: TNC female, supporting one or two antennas
Ethernet 5 port Ethernet switch 10/100 Mbps, auto MDX, M12 connector 4 poles D-coded female
GPSGPS receiver with NMEA 0183 data stream, tracking sensitivity -154 dBm (typical) Antenna connector: TNC female, support for active and passive antennas
USBUSB 2.0 host interface, Connector type: USB A
Serial Protocol: 1 x RS232 DCE interface instead of digital I/O port Connector type: M12, 4 poles, D-coded female
Digital I/O2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC 2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W Connector: M12 8 poles A-coded female
PowerStandard - Nominal voltages: 24VDC, 36VDC and 48VDC according to EN50155; Voltage range 12VDC to 60VDC, -15% / +5% Option - Nominal voltages: 72VDC, 96VDC and 110VDC according to EN50155; Voltage range 50VDC to 136VDC, ±10% Max. power consumption: 15W Compliant with EN50155 class S2/C1: interruptions up to 10ms are tolerated, no batteries Connector type: M12, 4 poles, A-coded male, Pin1 +, Pin3 -
EnvironmentOperational temperature: -40 °C to +70 °C; Storage temperature: -40 °C to +85°C Conformal coating, IP40 with SIM / USB cover mounted, IP52 option
Dimensions, weightWidth 190mm x height 86mm x depth 104mm, approx. 1'100g
MTBF117'000h-296'000h depending on model
EMC standardsEN 55022:2010, EN 61000-6-2:2005, EN 50121-3-2:2006 (Emission) EN 55024:2010, EN 50121-3-2:2006, EN 50121-4:2006 (Immunity)
Type ApprovalCE according to R&TTE Railway: EN50155, EN 45545-2
Order numbers NB3700-U NB3700-U-G NB3700-UW-G NB3700-L-G NB3700-LW-G NB3700-LWPb-G(contact sales for more models, options or project specific adaptations) UMTS Router UMTS Router + GPS UMTS, WLAN Router + GPS LTE Router + GPS LTE, WLAN Router + GPS LTE, WLAN Router + 70, 96, 110V PSE + GPS

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-LWPb-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.
  • EN50155 TX / EN45545
  • LTE/UMTS modem
  • WiFi AP/client
  • 5 Ethernet M12
  • 2 digital I/O
  • OpenVPN, IPsec, QoS
  • Options: SIP-to-GSM gateway
  • Isolated power
  • Option: extended input voltage range 72, 96, 110V
Mobile / Cellular1-2 Multimode LTE, UMTS and GSM modules LTE/4G FDD Bands: B1(2100), B2(1900), B3(1800), B5(850), B7(2600), B8(900), B20(800) DC-HSPA+/UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: LTE max. 100 Mbps downlink / 50 Mbps uplink (DC-HSPA+ 42/5.76) - or - Multimode UMTS and GSM module UMTS/3G: B5(850), B8(900), B2(1900), B1(2100) GSM/2G: B5(850), B9(900), B3(1800), B2(1900) Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink Antenna connector: 1-2 TNC female SIM slots: 2 Mini-SIM ISO/IEC 7810:2003, ID-000
WLAN / WiFiIEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO, access point or client Antenna connector: TNC female, supporting one or two antennas
Ethernet 5 port Ethernet switch 10/100 Mbps, auto MDX, M12 connector 4 poles D-coded female
GPSGPS receiver with NMEA 0183 data stream, tracking sensitivity -154 dBm (typical) Antenna connector: TNC female, support for active and passive antennas
USBUSB 2.0 host interface, Connector type: USB A
Serial Protocol: 1 x RS232 DCE interface instead of digital I/O port Connector type: M12, 4 poles, D-coded female
Digital I/O2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC 2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W Connector: M12 8 poles A-coded female
PowerStandard - Nominal voltages: 24VDC, 36VDC and 48VDC according to EN50155; Voltage range 12VDC to 60VDC, -15% / +5% Option - Nominal voltages: 72VDC, 96VDC and 110VDC according to EN50155; Voltage range 50VDC to 136VDC, ±10% Max. power consumption: 15W Compliant with EN50155 class S2/C1: interruptions up to 10ms are tolerated, no batteries Connector type: M12, 4 poles, A-coded male, Pin1 +, Pin3 -
EnvironmentOperational temperature: -40 °C to +70 °C; Storage temperature: -40 °C to +85°C Conformal coating, IP40 with SIM / USB cover mounted, IP52 option
Dimensions, weightWidth 190mm x height 86mm x depth 104mm, approx. 1'100g
MTBF117'000h-296'000h depending on model
EMC standardsEN 55022:2010, EN 61000-6-2:2005, EN 50121-3-2:2006 (Emission) EN 55024:2010, EN 50121-3-2:2006, EN 50121-4:2006 (Immunity)
Type ApprovalCE according to R&TTE Railway: EN50155, EN 45545-2
Order numbers NB3700-U NB3700-U-G NB3700-UW-G NB3700-L-G NB3700-LW-G NB3700-LWPb-G(contact sales for more models, options or project specific adaptations) UMTS Router UMTS Router + GPS UMTS, WLAN Router + GPS LTE Router + GPS LTE, WLAN Router + GPS LTE, WLAN Router + 70, 96, 110V PSE + GPS

NB3700 CompactRail

NetModule
 NB1600 Concentrator

Código: NB1600-R-S

For small projects use this product on the central side as a VPN server.
  • OpenVPN Server
  • IPsec Concentrator
  • DynDNS Server
  • PPTP Server
  • Programmable with Arena
Digital I/O 2 digital inputs, maximum input voltage 40 VDC, minimum voltage for level 1 (set): 7.2 VDC, maximum voltage for level 0 (not set): 5.6 VDC. Note: a negative input voltage is not recognized. 2 digital outputs, limiting continuous current: 1 A, maximum switching voltage 60 VDC, 42 VAC (Vrms), maximum switching capacity: 60 W Connector type: 8 pins of 15-pin terminal block
Ethernet2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed Connector type: RJ45
SerialProtocol: 3-wire RS232 Connector type: 3 pins of 15-pin terminal block
PowerRedundant power supply inputs Input voltage: 12V DC to 48V DC (-15% / +20%) Max. power consumption: 5W Connector type: 2+2 pins of 15-pin terminal block
Dimensions124.2mm x 45mm x 110mm, ca. 450g
EnvironmentTemperature range: -25 °C to +70 °C Ingress Protection Rating: IP40; MTBF: 547'000h
Safety StandardsEN60950-1:2006
EMC StandardsEN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission) EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
Type ApprovalsCE according to directive 1995/5/EC (R&TTE) FCC according to 47 CFR, Part 15
Order numbers: NB1600-R-S(contact sales for more models, options or project specific adaptations) VPN-Router for up to 25 clients

NB1600 Concentrator

Acksys
 RailTrack

Código: RailTrack/RRRXB

RailTrack is a ruggedized WiFi access point specially designed for railway and certified for trackside and tunnel infrastructures.It can be connected to the ground network through either Gbps fiber optic or copper connections.
  • Triple radio 802.11a/b/g/n/ac (MIMO 3T3R), up to 3 x 1.3 Gbps (radio bit rate)
  • MESH, WMM QoS, multiple SSID and centralized RADIUS security supported
  • Auto-sensing dual Gigabit 10/100/1000 Base TX auto MDI/MDIX network interface
  • 2 SFP slots: 1000 base X fiber optic or 10/100/1000 copper
  • +110 VAC to +230 VAC
  • Rugged aluminum enclosure, IP66 seal rating
    Ethernet network   > 2-port Gigabit Ethernet 10/100/1000 auto-sensing, waterproof 8-point M12 X-coded connectors (CAT-6A), auto MDI/MDIX cross-over, optional Ethernet bypass that redirects the network traffic in case of device or power supply failure (for daisy chain topologies), 1-port PoE+ PSE optional (IEEE 802.3at Type 2 Class 4)   > 2 SFP slots IP67 OSIS by Radiall™ : 1000 base X fiber optic or 10/100/1000 copper    
    WiFi network   3 radios IEEE 802.11a/b/g/n or IEEE 802.11a/b/g/n/ac, MIMO 3T3R, 2.4 / 5 GHz    
    WiFi radio data rate   802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps802.11n: MCS0-7, 3 streams (6.5 to 450 Mbps)802.11ac: MCS0-9, 3 streams (6.5 Mbps to 1.3 Gbps)    
    Operating frequencies   ISM : 2.4-2.483 GHz (up to 14 channels)UNII : 5.15-5.25 GHz (up 4 channels)UNII-2 : 5.25-5.35 GHz (up to 4 channels)UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC    
    Output power   Up to 24 dBm (aggregate), depending on radio card model    
    Radio connectors   9 N-type connectors (no antenna provided)    
    Security   IEEE 802.1x (centralized RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, legacy WEP supported    
    WiFi Modes   Access point, repeater, MESH point (IEEE 802.11s), client router, WMM QoS, multicast, VPN, dynamic routing and firewall modes fully supported    
    Administration   Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, administration software for Windows/Linux (ACKSYS NDM), save / restore configuration key (C-Key)    
    LEDs Signaling   Radio: activity and status | Ethernet (copper): link 10/100/1000 and activity | Ethernet (fiber): link and activity | PoE+ PSE: on-off | Power: on-off | Diagnostic | C-Key    
    Alarms & Inputs   One solid state relay output warning (with configurable action), 1 Form A, 60VDC 0.1A max & one input for external device control 24VDC max (3-pin Waterproof M8 connector)    
    Power supply   +110 VAC to +230 VAC (M12 3 poles S-coding connector), 50/60Hz, M6 ground screw    
    Consumption   30 W max (PoE powered device consumption excluded)    
    Dimensions & weight   Rugged aluminum enclosure, L: 305 x l: 200 x h: 75 mm with fixing points, 3.5 Kg    
    Standards   Safety : EN60950-1Radio : EN300-328 1.8.1 (2.4 GHz), EN301-893 1.7.1 (5 GHz, DFS)EMC : EN50121-4, EN301-489-1, EN301-489-17    
    Environment   IP66 seal ratingOperating temperature: -25°C to +70°C (HR 0-99%) or extended -40°C to +85°C, storage: -40°C to +85°CGORE ® protective vent (dehumidifying membrane)  

RailTrack

Acksys
 WLn-xROAD

Código: WLn-xROAD

WLn-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailer
  • WiFi IEEE 802.11a/b/g/n radio (MIMO 3T3R), up to 450 Mbps radio bit rate
  • MESH, WMM QoS, multiple SSID and centralized RADIUS security support
  • Web based configuration, SNMP administration
  • Auto-sensing Gigabit 10/100/1000 Base TX auto MDI/MDIX network interface
  • DC power supply input (+9VDC to +36VDC)
  • Shock & vibration proof rugged aluminum enclosure, IP66 seal rating
    Ethernet link   Gigabit 10/100/1000 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over    
    WiFi network   Compliant to the IEEE 802.11a/b/g/n MIMO 3T3R, 2.4 / 5 / 5.4 GHz standards    
    Radio data rate     450 Mbps  
    Radio channels   2.4 GHz (802.11b/g/n): 14 channels / 5 GHz (801.11a/h/n): 24 channels    
    Output power     Transmitter +20 dBm (TPC)    
    Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g/n and -95 dBm for IEEE 802.11b    
    Antennas connections     Up to three 2.4 / 5 GHz MIMO antenna, RP-SMA type connectors    
    Modulation     OFDM: BPSK, QPSK, 16QAM, 64QAM / DSSS: DBPSK, DQPSK, CCK     
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control    
    Modes     Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network, MODBUS/TCP wireless gateway, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, bridge router,  fast roaming (less than 30 ms single channel), redundancy (VRRP), WMM QoS, multicast and IGMP-Snooping modes are fully supported.    
    Administration   Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM    
    Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Signaling     LEDs signaling for radio quality, activity and status, Link 10/100/1000 and activity for the LAN port    
    Power supply     DC power supply (+9VDC to +36VDC), terminal block inside the enclosure    
    Consumption   10W typical power consumption    
    Dimensions & weight   Shockproof rugged aluminum enclosure, (L: 185 x W: 64 x H: 35 mm), 450 g with the cable and without the antennas    
    Standards     MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP66 seal rating EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)    
    Environment   Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +85°C    

WLn-xROAD

Acksys
 Hyperlan-Pack Outdoor high speed wireless Ethernet backhaul

Código: HyperLan-Rad/L

HyperLan-Pack is a solution to establish a high speed Ethernet wireless link between buildings, factories, CCTV cameras, offshore platforms and temporary installations ... to connect Ethernet networks or Ethernet devices between each other.
  • Cable-free building-to-building network communications …
  • Deliver 40 Mbps TCP data rate up to 5 Km or 10 Mbps TCP data rate up to 50 Km, depending on local regulations
  • Secure connectivity, narrow beam
  • 10/100 Base TX network interface
  • IP66 enclosure, Ethernet cable powered (POE)
    Ethernet link   10/100 base TX Ethernet port with auto détection, waterproof M12 8-point Ethernet connector, “plug & play" mode "auto MDI/MDIX cross-over", 25 m RJ45 cable    
    Radio link   Compliant with IEEE 802.11a (5.3 Ghz)    
    Power, sensitivity   Transmitter +20 dBm, Receiver -92 dBm    
    Antennas   Directional narrow beam antenna, N-type connector, 23 or 28 dBi depending to models, lightning surge protection included, mast mounting (50 mm)    
    Signaling   LAN & WLAN activity on LEDs    
    Administration   SNMP and ACKSYS NDM    
    Security   Pre-configured WPA2-PSK, hidden SSID, narrow beam (6°)    
    Power supply   POE IEEE 802.3af or +9VDC to +75VDC, 7W typical consumption    
    Dimensions & weight   IP66 aluminum enclosure (L: 80 x l: 175 x h: 57 mm) ; Directional antenna diameter: 60 cm (28 dBi)    
    Environment   Operating temperature: -25°C to +70°C, storage: -40°C à +80°C    

Hyperlan-Pack

Acksys
 WLg-ACCESS-ATEX

Código: WLg-ACCESS-ATEX-DC [H4]

WLg-ACCESS-ATEX is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments and also those where sparks and electric arcs occur...
  • WiFi IEEE 802.11 b/g or a/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration
  • 2-port auto-sensing 10/100 Base TX network interface
  • Aluminum IP66 enclosure, Zone 1 & 21, EX II 2GD Eex d IIC protection
  • Omni directional  antennas, Zone 1 & 21, IP66, EX II 2GD EExe II T6 protection
    Ethernet link   2-port Ethernet 10/100 auto-sensing, plug & play mode & auto MDI/MDIX cross-over    
    WiFi network   Compliant to the IEEE 802.11 b/g 2.4 GHz or a/h 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks; "ClearVoice" band provides non-overlapping channels for fast data transmission; Transmission Power Control (TPC)    
    Connections   Screw-in terminal block (Ethernet cables and power) inside enclosure, output through stuffing boxes    
    Data rate     Up to 108 Mbps (Super AG mode)  
    Channels   13 channels    
    Output power     Transmitter +20 dBm (TPC), +26 dBm with the WLg-RF400MW option  
    Sensitivity   Receiver -92 dBm for IEEE 802.11g and -95 dBm for IEEE 802.11b    
    Antennas   2 external antennas provided with 3m of low loss cable and wall mounting support : - Omnidirectionals, vertical polarization, dual-bande (2.4 GHz/5 GHz) - Gain : 5 dBi/2.4 GHz, 6 dBi/5GHz - Material : PVC-U (radome), stainless steel (support)    
    Modulation     OFDM : BPSK, QPSK, 16QAM, 64QAM et DSSS : DBPSK, DQPSK, CCK  
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control    
    Modes   Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & rapid roaming modes are supported    
    Administration   Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM    
    Systèmes d’exploitation     Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Signaling   LEDs signaling for LAN, WLAN network activity, 10/100 mode (inside enclosure)    
    Power supply   110/220VAC, 9 to 72 VDC or PoE (Depending on the model)    
    Consumption   7W typical power consumption    
    Dimensions & weight   Enclosure weight: 12 Kg, antenna weight: 286g +/- 10g Enclosure dimensions: 276 x 276 x 217 mm Antenna dimensions: ø 38mm x 250mm    
    Standards   Enclosure protection: EX II 2GD EEx d IIC, IP 66, Zone 1 & 21 Antenna protection: EX II 2GD EExe II T6, IP 66, Zone 1 & 21 Emission NF EN 55022 residential, immunity NF EN 61000-6-2 industrial    
    Environment   Operating temperature: -25°C to +55°C (HR 0-99%), storage: -40°C to +80°C Antennas: -20°C to +55°C    

WLg-ACCESS-ATEX

Acksys
 WaveNet-Ex

Código: WaveNet-Ex

WaveNet-Ex is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments as well as those where sparks and electric arcs occur.
  • Aluminum IP66 enclosure, ATEX & IECEx, group II (above-ground industries), category 2 (adapted to areas 1, 2, 21 & 22)
  • MIMO access point 300 Mbps, 802.11n dual band
  • Gigabit Ethernet network interface
  • Up to 3 intrinsically safe RF outputs (support any type of antennas)
    Ethernet link   1-port Ethernet 100/1000 base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, cable gland/RJ45 connector    
    WiFi network   Compliant to the IEEE 802.11a/b/g/n 2.4 / 5 GHz standards MIMO, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS),"ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power    
    Data rate   Up to 300 Mbps radio bit rate (2 streams, 150 Mbps per stream)    
    Channels   2.4 GHz: 14 channels in b/g, 7 channels in 11n / 5 GHz: 19 channels in a/h, 11 channels in 11n    
    Output power   Transmitter +20 dBm (aggregate mode)    
    Sensitivity   Receiver -92 dBm for 802.11a/g/n and -95 dBm for 802.11b    
    Antennas   Up to 3 intrinsically safe RF outputs: support any type of antennas    
    Modulation   OFDM, DSSS    
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control    
    Modes   Access point to build a WiFi network infrastructure, client to connect any Ethernet equipment to this network, MODBUS/TCP wireless gateway, Repeater, Mesh point (IEEE 802.11s), infrastructure, AD-HOC, client router, fast roaming (30 ms), WMM QoS, multicast and IGMP-Snooping modes are supported    
    Administration   Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM, serial port, Telnet/SSH, CLI    
    Signaling   LEDs signaling for LAN, WLAN network activity, 10/100/1000 mode (inside enclosure)    
    Power supply   230 VAC or 24 VDC or PoE    
    Consumption   8 Watts typical    
    Dimensions & weight   Enclosure weight: 6Kg Enclosure dimensions: 198 x 198 x 132 mm    
    Standards   II 2G Ex db [ia Ga] IIC T5 II 2D Ex tb IIIC T100° Db  Emission NF EN 55022, immunity NF EN 61000-6-2  
    Environment   Operating temperature: -40°C to +60°C Storage: -40°C to +80°C, Humidity: 5% to 95% (non-condensing)    

WaveNet-Ex

Acksys
 WLg-SWITCH 3-in-1 combo- Rugged 8-port Ethernet switch, POE injector, WiFi AP - BRIDGE - REPEATER

Código: WLg-SWITCH

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a comp
  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps

  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS

  • Web based configuration, SNMP administration

  • 8-port Ethernet 10/100 Base TX with PoE 802.3af injector 

  • Dual DC power supply input (+9VDC to +75VDC)

  • IP30 metal enclosure, DIN rail or panel mounting

   Ethernet Switch     8-port 10/100 Base TX Fast Ethernet interface, RJ45 connector, auto MDI/MDIX crossover, IEEE 802.3x full-duplex and half-duplex auto-adaptive, wire-speed reception and transmission, high performance lookup engine, automatic address learning and aging, 120W PoE PSE feature according to IEEE 802.3.af    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set    
    Radio data rate     Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps    
    Channels     13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws.    
    Output power     Transmitter +20 dBm (Optional 26 dBm)  
    Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b  
    Antennas     Two 2dBi 2.4 / 5 GHz antenna for diversity mode  
    Modulation     OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK    
    Security     64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control    
    Modes     Access point to build a WiFi network infrastructure, Bridge, Bridge router, fast roaming, Infrastructure & AD-HOC, BRIDGE ROUTER, rapid roaming (less than 50 mS)  modes are supported    
    Administration     Built-in WEB interface, SNMP V2c agent, ACKSYS NDM (Networking Device Manager). ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)    
   Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Protocols     Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …    
    Signaling     Led display for power supplies, LAN on each port & WLAN activity, radio receive level    
   Alarms     Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
    Power supply     Dual input, +9 to +75VDC, removable clamp cage terminal Device should be powered from a +48VDC power supply (130W) in the PoE PSE mode    
   Consumption     10 Watts maximum (PoE injector power consumption not included)    
    Dimensions & weight     L: 110 mm x W: 50 mm x H: 151 mm (4.33 x 1.97 x 5.94 inch), weight 650g (22.9 oz)    
    Environment     Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-SWITCH

Acksys
 WLg-IDA-N WiFi access point, 2-port Ethernet bridge & WDS repeater

Código: WLg-IDA/N

WLg-IDA/N features a WLAN interface coupled to a 2-port Ethernet 10/100 designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.
  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration
  • Auto-sensing 10/100 Base TX network interface
  • PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
    Ethernet link     2-port Ethernet 10/100 auto-sensing; RJ45 connectors; plug & play mode & auto MDI/MDIX cross-over    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set    
   Radio data rate     Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps  
   Channels     13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws.    
   Output power     Transmitter +20 dBm (Optional 26 dBm)    
   Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b    
   Antenna     One 2dBi 2.4 / 5 GHz antenna (RP-SMA connector) + one RP-SMA connector for an additional antenna (diversity mode)    
    Modulation     OFDM : BPSK, QPSK, 16QAM, 64QAM et DSSS : DBPSK, DQPSK, CCK    
   Security     64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control    
   Modes     Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & rapid roaming (less than 50 ms) modes are supported    
   Administration     Built-in WEB interface; SNMP V2c agent; ACKSYS NDM (Networking Device Manager). ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-IDA unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)    
    Operating systems     Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
   Protocols     Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …    
   Signaling     Led display for power supplies, LAN on each port & WLAN activity, radio receive level    
   Alarms     Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
   Power supply     PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input (removable clamp cage terminal)    
   Consumption     4.5 Watts typical    
   Dimensions & weight     Shock & vibration proof metal enclosure (L: 110 x W: 150 x H: 120 mm), 570 g    
   Standards     MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (EMC)    
   Environment     Operating temperature: -20°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-IDA/N

Acksys
 WLg-IDA-S Wireless RS232 - RS422 - RS485 serial device server

Código: WLg-IDA/S

WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer
  • Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps
  • 9-36 VDC wide range power supply
  • IEEE 802.11 a/b/g/h WiFi radio (2.4 / 5 GHz)
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
  • Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP)
  • TCP Client / Server, UDP & MODBUS/TCP support
    Serial link   Full RS232 / 422 / 485 serial interface, 250 Kbps    
    RS signals available   RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and –RX signals can be polarized with jumpers)    
    Cables connection   SUB D9 male connector for RS signals, 5-point removable terminal block for RS422/485    
    WiFi network   Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip-set, single channel rapid roaming (<50 ms)    
    Radio data rate   Up to 108 Mbps (Super AG mode)    
    Channels   13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)    
    Output power   Transmitter +20 dBm (TPC)    
    Sensitivity   Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b    
    Antennas   Two 2 dBi bi-band external antennas, RP-SMA connector    
    Modulation   OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK    
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS)    
    Modes   Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication (ad hoc) or from access point    
    Administration   Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM, TELNET from the serial link    
    Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Signaling   Led display for power supplies, serial & WLAN activity, radio receive level    
    Alarms   Relay output warning: power failure, WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
    Power supply   Dual input, +9 to +36VDC    
    Consumption   4.5 Watts typical    
    Dimensions & weight   Shockproof & vibration proof metal enclosure (L: 110 x W: 150 x H: 120 mm), 550 g    
    Standards   MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (CEM)    
    Environment   Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-IDA/S

Acksys
 WLn-LINK-OEM

Código: WLn-LINK-OEM-RJ/R

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.
  • Complete ready-to-use solution (access point, bridge, repeater, Mesh point) requiring no driver software
  • Small sized PCB (L: 103 x l: 57 x H: 20 mm)
  • WiFi IEEE 802.11a/b/g/n 3T3R & Gigabits LAN interfaces, radio bit rates up to 450 Mbps
  • Secure WiFi link
  • Available in industrial temperature range
  • Web based configuration, SNMP administration
  • Reduces TTM, design risk & cost
    Ethernet interface   1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, RJ45 or TTL Ethernet interface (HE10 connector)    
    Serial interface   One serial port (TTL level)    
    WiFi interface   1 radio IEEE 802.11 a/b/g/n, MIMO 3T3R, 2.4 / 5 Ghz    
    WiFi radio data rate   802.11a : 6, 9, 12, 18, 24, 36, 48 and 54 Mbps802.11b/g : 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps802.11n : MCS0-23, 3 streams (6.5 to 450 Mbps)    
    Operating frequencies   ISM : 2.4-2.483 GHz (up to 14 channels)UNII : 5.15-5.25 GHz (up 4 channels)UNII-2 : 5.25-5.35 GHz (up to 4 channels)UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)UNII-3 : 5.725-5.825 GHz (up to 4 channels)Supports DFS and TPC    
    Output power   Up to 24dBm (aggregate), depending on radio card model    
    Antennas   3 U.FL connectors    
    Security   IEEE 802.1x (RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, WEP    
    WiFi Modes   Access point, client, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, client router, WMM QoS, multicast, dynamic routing and firewall modes fully supported, fast roaming (less than 30 ms), redundancy (VRRP)    
    Administration   Built-in WEB interface, SNMP agent, administration software for Windows/Linux (ACKSYS NDM)    
    LEDs Signaling   Radio : quality and activity | Ethernet : link 10/100/1000 and activity | Power : on-off | Product diagnostic    
    Power supply   +5VDC (+/- 5%), 8 Watts typical    
    Dimensions & weight   Small sized PCB, L: 103 x l: 57 x H: 20 mm, approx. 50g    
    Standards   Radio module CE and FCC certified. WLn-LINK-OEM has to be certified in the final product.    
    Environment   Operating temperature: -20°C to +70°C or -40°C to +85°C (for extended temperature range model)Storage: -65°C to +100°C, Humidity: 5% to 95% (non-condensing)    
    Warranty   1 year    

WLn-LINK-OEM

Anybus
 Unmanaged L2 Switch for Industrial Applications

Código: AWB5001

The Anybus L2 Switch provide full Gigabit and ultra-high throughput. Support for dual power supplies ensures uninterupted operations.
  • FULL GIGABIT SWITCHING
  • 8 port Gigabit Ethernet with Auto Negotiation
  • 4k MAC address table
  • Supports 9 kB Jumbo Frame
  • IEEE 802.1p QoS/802.1Q VLAN
  • Broadcast storm protection
  • Store and forward with non-blocking switch fabric
  • IEEE 802.AZ EEE POWER MANAGEMENT
  • Ultra-low power consumption, max 2.6W
  • Energy efficient with idle power saving mode
  • Support for dual power supplies
  • RUGGED MECHANICAL DESIGN
  • IP40 ingress protection
  • DIN-rail mount
  • Wide operating temperature range, -40 to 70°C

Ethernet ports

     8 x 1 Gbit/s RJ45, auto negotiation

Operating temp.

     -40oC-70oC, 5-95 % non-condensing

Data speeds

     1000Base-TX

     100Base-TX

     10Base-T

Power

     12/24/48 VDC (9.6-60 VDC)

     IEEE 802.3az EEE Power management: Ultra low power design (max  2.6 W), Energy efficient Ethernet with idle power saving mode

     Support for dual power supplies

Weight

     560 g

Housing material

     Steel

 Ingress protection

     IP40

 Dimensions

     145 x 100 x 40 mm (without DIN rail clip)

 Mounting

     DIN rail mount (bracket included)

Unmanaged L2 Switch for Industrial Applications

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X