DeviceNet Master Simulator

DeviceNet Master Simulator

The Master Simulator is an easy to use tool to test the DeviceNet Adapter/Slave functionality of any fieldbus device.
Categorías: Software
Protocolos: Devicenet

Características destacadas

  • Easy to use test and diagnostic tool for DeviceNet Adapters
  • Read/Write of cyclic I/O data and explicit messaging data in various formats
  • Automatic DeviceNet address search
  • Automatic detection of I/O data size
  • Works even without EDS-file
  • Supports all standard DeviceNet baudrates
  • Ideal for mobile usage with laptops Windows 7/Vista/NT/XP
  • Connection via USB port
       

Descripción

The Master Simulator is an easy to use tool to test the DeviceNet Adapter/Slave functionality of any fieldbus device. 

AUTOMATIC SCAN

The automatic Slave identification functionality permits communication to almost any CANopen slave device even if the normally required EDS file is not available.  Any DeviceNet Slave can be set into operation and afterwards clear and user friendly dialog boxes are used to exchange cyclic I/O data or acyclic explicit messages between the DeviceNet Slave and the Simulator.

The Master Simulator consist of a Windows based Software tool and a DeviceNet interface circuitry (Dongle). The Dongle is plugged into the USB port of the PC and provides on the other side a 9-pin D-Sub connector as the DeviceNet Interface. The Dongle is powered from USB port.

To connect a DeviceNet Slave, a DeviceNet cable and additionally the 24 Volt DeviceNet power supply is required. These components are recommended accessories and are not included in the scope of supply.

Technical specifications

Dimensions  (L•W•H)
67 x 41 x 20 mm
                                        
Operating temperature -0 to +55 °C  
Power supply Powered by the PC/Laptop USB port
 
Max cable length
2 meters
 
Baudrate 125-500 kbit/s  
PC connection via USB  
PC requirements Win 9X/2K/ME/XP/7  
Certifications CE, RoHS  

Ordering information

Order Code 

018410

                                      
Included components       DeviceNet Master Simulator USB dongle,
software CD, D-SUB connector
 
Optional accessories DeviceNet Cable-Kit
Order no: 017509

Consists of 2 m thin DeviceNet
cable with a 9-pin D-Sub and
one 5-pin pluggable screw
connector, power supply
cable, bus termination resistor.
 
Guarantee  1 years   

Referencia Descripcion
018410 The Master Simulator is an easy to use tool to test the DeviceNet Adapter/Slave functionality of any fieldbus device.
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información