PROFIBUS Master Simulator

PROFIBUS Master Simulator

The Master Simulator is an easy to use tool to test the PROFIBUS functionality of any fieldbus device. Two versions are available, one basic version for PROFIBUS-DP only, and a full version for both PROFIBUS-DP and DPV1.
Categorías: Software
Protocolos: PROFIBUS

Características destacadas

  • Easy to use test and diagnostic tool for PROFIBUS DP/DPV1 slaves
  • Read / Write of cyclic I/O data in various formats
  • The DPV1 version permits acyclic parameter read/write access
  • Automatic Profibus slave address search
  • Automatic detection of I/O data size
  • Display of standard Profibus diagnostic messages
  • Works also without GSD file
  • No programming required
  • No external power supply required
  • Ideal for mobile usage with laptops running Win98, 2000, ME, XP, Vista, 7, 8

Descripción

The Master Simulator is an easy to use tool to test the PROFIBUS functionality of any fieldbus device. Two versions are available, one basic version for PROFIBUS-DP only, and a full version for both PROFIBUS-DP and DPV1.

aUTOMATIC SCAN

The automatic Slave identification functionality permits communication to almost any PROFIBUS slave device even if the normally required GSD file is not available. So it is possible, to initialize a slave device step by step and finally read or write the I/O data.

The Master Simulator also permits the address assignment of the Profibus slaves via the bus and to display and analyse diagnostic messages of Profibus slaves on the screen

 

The connection to the Profibus interface of the slave device is made via an RS-232 to Profibus converter, which is built-in into a small D-SUB connector housing. This converter is connected to the PC´s COM-Port via a serial connection cable

Technical specifications

Dimensions  (L•W•H)
62 x 34 x 15
    
Operating temperature -0 to +55 °C  
Power supply 5 Volt / 60 mA taken from the PROFIBUS interface of the device
 
Max cable length
2 meters
 
Baudrate 19.2 kbit/s  
PC connection via COM port (RS-232)  
PC requirements Win 9X/2K/ME/XP/7  
Certifications CE, RoHS  

Ordering information

Order Code 

017504 (PROFIBUS-DP ONLY) - 017505 (PROFIBUS-DP/DPV1)

                          
Included components       PROFIBUS Master Simulator software CD,
connection cable to connect the converter to a
PC COM-Port and an RS-232/ PROFIBUS converter.
 
Optional Accessories  USB-RS-232 configuration adapter (Order Code 019570)  
Guarantee  1 years   

Referencia Descripcion
017504 The Master Simulator is an easy to use tool to test the PROFIBUS functionality of any fieldbus device. Two versions are available, one basic version for PROFIBUS-DP only, and a full version for both PROFIBUS-DP and DPV1.
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información