CANio 500

Características destacadas

  • Suitable for CANopen and CAN layer 2 networks
  • 4 digital inputs + clamp 15 (between 0 ... 34 V, threshold at 50 %)
  • 4 digital outputs, max. 1 A, output voltage free selectable
  • 4 analog inputs, 12 bit res. (+/- 5 V, or 0-10 V, or +/- 100 mA)
  • 4 analog outputs, 12 bit res. (+/- 5 V, or +/- 10 V, or 0-5 V, or 0-10 V, switchable via software)
  • Universal use due to robust design and wide power supply range
  • Easy configuration and versatile configuration options
  • Adaptation to specific requirements via CANio ADK
  • Plug-in version available for direct integration into customer hardware

Descripción

Universal I/O gateway for CAN and CANopen systems

The CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles.

 

 


How it works

A key feature of the CANio 500 are the inputs and outputs for digital and analog signals, which can be configured very flexible. The device has each four analog inputs and outputs with a 12 bit resolution. The analog inputs are available with different voltage ranges, as well as with differential input circuits or current inputs. The output voltage range can be individually programmed in the working range of -10 V to +10 V for each analog output.

In addition, the device has four digital inputs and outputs. The output voltage range can be freely selected within a wide range, at this, the switching threshold of the inputs automatically adjusts according to the selected voltage range and the outputs are short circuit protected.

A special focus, during the development of the CANio 500, was the device operability within CANopen and also basic CAN systems. For this reason, the CANio 500 was designed as a self-starting CANopen slave, with all important parameters, such as Node-ID or sampling rates for the analog inputs, stored as default values on the device. This enables the device to start its operation directly after start up, without making any further settings, and allows due to this the operation in basic CAN systems.

The individual configuration of the CANio 500 for different applications can be done either by loading configuration data via a CANopen master or by sending configuration messages in a pure CAN network or offline via the free CANio configuration tool. Configurations that have been created with the CANio configuration tool can be saved as a project and on customer request preinstalled on ordered devices before delivery.

 

CANio Configuration Tool

The CANio Configuration Tool, included in the scope of delivery, enables the easy and fast configuration of the CANio 250 and CANio 500 devices. To download the configuration file to the device a CAN interface is required, e.g. USB-to-CAN V2 compact. The range of functions of the Windows software includes:

  • CAN parameter configuration (baud rate, message ID's, cycle times) 
  • Configuration of the digital inputs (interrupt capability, debounce time) and (only CANio 500) of the analog inputs (interrupt capability, delta value)
  • Configuration of the digital outputs (default value) and (only CANio 500) analog outputs (output voltage range, default value)   
  • Firmware update
  • Download of the ADK applications
  • Storage of the configuration into a configuration file and import of the configuration file

 
Download CANio Configurator Tool

 

Technical specifications

CAN Protocols CAN, CANopen
CAN Bus Interface ISO 11898-2
Galvanic Isolation Yes (500 V DC)
Digital Inputs 4 x + clamp 15 (between 0 ... 34 V, threshold at 50 %)
Digital Outputs 4 x, max. 1 Ampere, output voltage free
selectable, up to 32 V
Analog Inputs 4 x, 12 Bit Res. +/- 5 V, or 0-10 V, or +/- 100 mA
Analog Outputs 4 x, 12 Bit Res. +/- 5 V, or +/- 10 V, or 0-5 V, or 0-10 V, switchable via software
Further Interfaces  2 LEDs; Measurement of the power supply
Temperature range for operation -40 °C to +70 °C
Power supply 6-32 V
Types of Plugs CAN: D-SUB-9; I/O: D-SUB-HD15
Protection Class IP42
Dimensions 120 x 82 x 32 mm

 

Contents of delivery

  • CANio 500
  • Manual
 

Order number

1.01.0098.00000 CANio 500 - Version with 0 to 10 V Analog Inputs
1.01.0098.00001 CANio 500 - Version with -5 to +5 V Analog Inputs
1.01.0098.00002 CANio 500 - Version with +/- 100 mA Analog Inputs

 

Related products

Especificaciones Tecnicas

CAN Protocols CAN, CANopen
CAN Bus Interface ISO 11898-2
Galvanic Isolation Yes (500 V DC)
Digital Inputs 4 x + clamp 15 (between 0 ... 34 V, threshold at 50 %)
Digital Outputs 4 x, max. 1 Ampere, output voltage free selectable, up to 32 V
Analog Inputs 4 x, 12 Bit Res. +/- 5 V, or 0-10 V, or +/- 100 mA
Analog Outputs 4 x, 12 Bit Res. +/- 5 V, or +/- 10 V, or 0-5 V, or 0-10 V, switchable via software
Further Interfaces 2 LEDs; Measurement of the power supply
Temperature range for operation -40 °C to +70 °C
Power supply6-32 V
Types of Plugs CAN: D-SUB-9; I/O: D-SUB-HD15
Protection Class IP42
Dimensions 120 x 82 x 32 mm

Referencia Descripcion
1.01.0098.00000 CANio 500 Universal I/O gateway for CAN and CANopen systems
1.01.0098.00001 CANio 500 Universal I/O gateway for CAN and CANopen systems
1.01.0098.00002 CANio 500 Universal I/O gateway for CAN and CANopen systems
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información