VScom SER-485
Características destacadas
- Preliminary
- Converts RS232 <=> RS422/485=>
- RS485 bitrate adaptive ARTc (adaptive baudrate detection in real-time)
- Full Software Configuration, NO Jumpers. Quick configuration for standard modes
- Wide range DCin 9-30V @ 200mA
- LEDs for Power, RS232 & RS485
- Line Termination: built-in 120Ω resistor software controlled
- DIN-Rail mountable
Descripción
The SER-485 is an adapter to convert bidirectional signals from RS232 to RS422 and RS485 in industrial environments. In RS485 mode the data direction is managed by the bitrate adaptive function of ART (Automatic Receive Transmit control). ART analyzes the data in real-time, and adapts to the setup of the RS232 port.
All options and parameters of SER-485 operation are configured by software, controlled via an easy-to-use menu structure. This menu is accessed via standard terminal programs. The SER-485 is a NO Jumper type of device.
With SER-485 often used operation modes are selected by simple DIP switches. The full versatility is controlled by the built-in software configuration menu. The behaviour of RS422 and various options of RS485 are selected by an easy-to-use menu structure.
The internal termination resistors allow to prepare the RS485 signals for connection to customers networks. These internal resistors are controlled by the configuration. There is no need to open the case for configuration.
The VScom SER-485 succeeds the Converters VScom SER-485 Lite and SER-485 PRO.
Application | |
Building automation system SCADA system RS232 line length extension | Automatic warehouse control system Industrial / Factory / Laboratory automation Wafer fabrication system |
414 | VScom SER-485 |
Packing list | VScom Converter SER-485 |
Options | |
663 | 6-pin Terminal block adapter to DB9 female |
6033 | Power supply adapter 9V DC, 300mA |
6692 | DK-NCP DIN-Rail mounting kit |
6693 | WK-NCP Wallmount kit |
>Back to top |
Especificaciones Tecnicas
Hardware Specifications | |
RS232 | DCE DSub9 female |
RS485 | Automatic Receive Transmit control (ARTc) Adaptive baudrate detection in real-time |
Line adjust | Built-in Termination resistor 120Ω, software controlled |
Protection | Serial ports compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
Operation Modes | RS422 RS485 by ART or RTS RS485 Half- and Full-Duplex Ten basic modes selected by DIP switch |
Cablelength | max. 1200 m |
Speed | max. 1Mbpsmax. 250kbps with ART |
Connectors | RS232 1x DSub9 female RS485/RS422 1 x DSub9 male optional terminal block |
Software Configuration | |
Configuration Menu | Various parameters of signal conversion are defined via an easy-to-use menu interface, access is via standard terminal programs (Hyperterminal, miniterm, ...) |
Operation Modes | RS422 RS485 by RTS RS485 by ART (Automatic Receive Transmit control) |
ART options RS485 | Transmit/Receive change as quick, average, standard |
Wiring | RS422 (4-wire) RS485 Full Duplex (4-wire) RS485 Half Duplex (2-wire) no Echo |
Termination | RS422/485 line termination 120Ω, controlled via operation mode |
RS485 BIAS | not required |
Power and Environment | |
Power requirements | 9-30V DC, 500mW |
Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
Dimension | 115×73×25 mm³ (W×L×H) |
Operating Temp | 0°C - 60°C |
Storage Temp | -20°C - 85°C |
Case | SECC sheet metal (1mm) |
Weight | 150 g |
Referencia | Descripcion |
---|---|
414 | VScom SER-485 (SER-485 PRO, SER-485 Lite) |
Documentacion | VScom SER-485 Datasheet |