Alekto 2

Características destacadas

  • Ti Sitara AM3354 @ 720MHz, 256MB DDR2
  • 720p Video
  • 1 x microSD, 1 x CFAST
  • 2 x LAN
  • 1 x USB 2.0 OTG
  • 2 x USB 2.0 Host
  • 2 x RS232/422/485
  • 1 x CAN Bus
  • 8 x Digital-I/O
  • 1 x I²C
  • 1 x SDIO-Slot for Wi-Fi
  • 1 x mPCIe-slot for 3G-Modem
  • 1 x Console Port
  • Low Power, fanless
  • Debian GNU/Linux, Windows EC 7
  • DIN RAIL mountable


The OnRISC Alekto 2 is a RISC industrial embedded computer based on ARM Cortex-A8 with NEON SIMD Coprocessor. The great variety of interfaces like LAN, CFast, USB, I²C, serial interface, digital I/O plus more options makes it easy to connect various industrial devices to the OnRISC.

Compact dimensions and DIN Rail mounting capability make the OnRISC to a space saving and flexible mounting industrial computer. It is feasible to be installed even in space limited environments. The internal microSD slot protects the system software against accidentally removal.

The miniPCIe slot provides opportunities for wireless communication. For example WLAN cards are available, and the connected SIM slot allows to use GSM/3.5G modems.

Due to RISC based architecture the OnRISC has very small power consumption, so fanless heat dissipation is possible. Working in a wide temperature range from -10°C up to 50/75°C the OnRISC can be applied in under harsh industrial conditions. Therefore the OnRISC is downright designed for industrial automation.

The embedded computer runs full-featured Debian GNU/Linux on ARM operating system Kernel. This system is installable on a microSD card to place in the internal card-reader.

With Debian's repository database it is easy to install and update the free software on the OnRISC. The OnRISC is capable to act directly as a software development host, WEB, Mail, Print and Database server or as a desktop computer with X11 window manager and many more.

Windows Embedded Compact 7 is also available as operating system. More software is under development.

Building automation system Automatic warehouse control system Self-service banking system (ATM) Wafer fabrication system Database server Small development host Remote and distributed serial devices control SCADA system Industrial / Factory / Laboratory automation WEB and Mail server Print server Small desktop with X11 windows manager and office software
Part No.6820

Especificaciones Tecnicas

Hardware Ti Sitara AM3354 RISC CPU @ 720MHz256MB DDR2Real time clock
Mass Storage microSD-card as internal boot device, SD 2.0 / SDHCCFast-Slot, SATA as data storage
Network 2x 100/10 MBit Ethernet
Display & Audio Display PowerVR SGX530 3D engine, resolution up to 720pOpenGL-ES 1.1+2.0, Direct3D Mobile, OpenVG 1.0, OpenMaxAudio 2 channel 48kHz over display
Expansion Slots 1x SDIO for WLAN 802.11b/g1x miniPCIe via USB 2.0 (for WLAN, GPS, GSM/3G/4G card)SIM card for GSM/3G/4G modems in miniPCIe slot
Peripherals 2x USB 2.0 as Host1x USB 2.0 OTG1x Console Port RS2321x I²C2x RS232/422/485
CAN Bus 1x CAN High Speed, 20kbps up to 1MbpsSignals: CAN_H, CAN_L, CAN_GNDVScom CAN API, CANFestival, CANopen, LinCAN
Digital Input/Output 8x TTL signals (64mA sink / 32mA source)Configurable Input/Output (0/2/4/6/8 inputs)Maskable IRQ for input signalsTerminal block connector
LED 1x Power, 1x 3GLAN: 2x Link and SpeedSerial: 2x TxD and RxD
Serial Ports
Features 2x RS232/422/485Highspeed UART, 128 Byte FIFO (FT2232D)RS232: up to 500 kbpsRS422/485: up to 3.0 Mbps
Available Modes RS232RS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex, without echoConfigured by DIP-Switch or Software
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2−wire: Data+/-, GNDRS485 4−wire: Tx+/-, Rx+/-, GND
RS485 Data Direction Control by ARTc (Automatic Receive Transmit control)
Power and Environment
Power Input 9 - 32V DC1.5A @ 12V without Wi-Fi and 3G cards3-pin Terminal block connector, polarity neutralAuxiliary Output 5V @max. 0.5A on Digital-I/O connector
Temperature Operating CFast mode: -10°C - 50°C, without Wi-Fi and 3GOperating OTG mode: -10°C - 75°C, without Wi-Fi and 3GStorage: -20°C - 85°CHumidity: 10-85% non-condensing
MTBF n.a.
Approvals EMC: FCC Class A, CE Class AEnvironment: RoHS
Dimensions 161×112×53 mm³ (W×L×H)171×128×53 mm³ including all connectors
Weight 0.8kg
Construction Material 1mm Metalsheet
Mounting DIN RailWall mount
Software Specifications
Linux Debian GNU/Linux Kernel 3.2 for ARM
Windows Windows Embedded Compact 7
Android to come soon
Optional accessories
Power supply Power adapter 12V @ 1.5A
Boot microSDs with Debian GNU/Linux installed (4/8GB)with Windows EC 7 installed (4/8GB) + License
Wi-Fi SDIO card for WLAN 802.11b/g
GSM/UMTS mPCIe card for 3G modem
Starter Kit OnRISC Alekto 2 system4GB microSD card for Linux insertedPower adapter 12V @ 1.5AAdapter cable for console portDocumentation and Development Software on DVD

Referencia Descripcion
6820 6820
Si continuas utilizando este sitio aceptas el uso de cookies. más información