Anybus Communicator - CC-Link

Características destacadas

  • Saves machine builders and device manufacturers of integrating a CC-Link interface
  • Allows system integrators to retro-fit older automation devices into CC-Link communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with CC-Link support
  • Performs complete serial protocol conversion, no PLC function blocks required
  • Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network
  • Possibility to connect upto 31 nodes via one Communicator giving inexpensive CC-Link network connectivity for your devices
  • Always free technical support from HMS and our global Anybus Distributors

Descripción

Integrate your serial RS-232/422/485 based industrial devices and equipment to a CC-Link control system without the need for any changes to the device. Just connect, configure and you're done!

The Anybus Communicator is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment to CC-Link. The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current CC-Link specifications guaranteeing network compatibility.

Convert almost any type of serial protocol

The Communicator is capable of converting almost any type of serial protocol such as Modbus RTU, ASCII, DF1 or any other type of proprietary Query/Response or Produce/Consume protocol.

Typical serial applications

Typical serial applications include variable frequency drives, sensors, actuators, human machine interfaces, barcode readers, RFID readers and industrial scales among others. 

Serial protocol configuration features

No high level programming skills are needed to set up the Anybus® Communicator as configuration is accomplished using the included, easy to use Windows™ based ACM (Anybus Configuration Manager).

  • Selectable RS-232/422/485 interface
  • Pre-defined 6-step Modbus-RTU configuration wizard
  • Selectable pre-loaded DF1 commands. No scripting or serial frame building required!
  • Ability to configure ASCII or vendor specific protocols (Request/Response or Produce/Consume via a visual frame building interface 
  • Multi-language support for English, German, Spanish, Italian, French, Polish, Russian, Chinese and Japanese
  • Handy Save/Load function allows for a completed configuration to be re-used for many other installations
  • Password protection prevents unauthorized upload and download of configurations
  • Serial Line Listener and In-built Checksum calculations for diagnostic and troubleshooting

CC-Link interface features

  • Complete CC-Link slave Version 1 and 2 functionality
  • CC-Link Conformance BTP-05027-B specification
  • Max. 896 bits/128 words (368 bytes) of I/O data in each direction
  • Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
  • Up to 4 occupied stations
  • Up to 8 extension cycles (version 2 only)
  • CC-Link configuration via on-board switches or via .CSP file
  • 1x 5-pin, 5.08 Phoenix plug network connector
Order Code  AB7008  
Stock Item YES  
Included components     Resource CD, Configuration cable (RS-232) port, Installation sheet, D-sub connector with screw terminals for serial sub-network (Power supply not included) 
Optional Accessories USB-RS-232 configuration adapter (Order Code 019570) 
Guarantee 3 years  

Especificaciones Tecnicas

Dimensions (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight150g or 0,33 lbs
Operating temperature0 to +55 °C or 0 to +131 °F
Storage temperature -40 to +85 °C or -40 to +185 °F
Power supply24 VDC
Current consumption max. 200mA (Typical 100mA)
Serial application InterfaceSelectable RS-232, RS-422, RS-485
Max stations 31 nodes via RS-422 or RS-485
Galvanic isolation On both serial and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
Protocol: Modbus RTU Modbus RTU Master - Request/Response
Protocol: ASCII/Vendor SpecificRequest/Response or Produce/Consume
Protocol: Rockwell DF1DF1 Master
CertificationsCE, CULUS, ATEX/Haz.Loc

Referencia Descripcion
AB7008 Anybus Communicator - CC-Link
Si continuas utilizando este sitio aceptas el uso de cookies. más información