Características destacadas
- Saves machine builders and device manufacturers of integrating a Lonworks interface
- Unique gateway that can integrate industrial devices with serial Modbus-RTU into Lonworks based building control systems
- Requires no hardware or software changes to be made to the connected device
- Performs complete serial protocol conversion, no PLC function blocks required
- Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network
- Always free technical support from HMS and our global Anybus Distributors
Descripción
Integrate your Modbus serial RS-232/422/485 based industrial devices and equipment to a LONWORKS control system without the need for any changes to the device. Just connect, configure and you're done!
The Anybus Communicator is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment on a Modbus RTU network to Lonworks.
Convert classic Modbus registers for I/O data
The gateway makes it possible to convert Modbus registers data to LonWorks Variables (SNVT‟s and/or UNVT‟s). You can create a set of variables according to LonMark functional Profiles or you can create your own set of variables with User defined Network Variables (UNVT‟s).
The Communicator is slave a on the Modbus RTU side. This means that you connect this to a Modbus network which has a Modbus RTU Master connected. The configuration requires no programming and is made by an included configuration tool in Windows environment.
The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current Lonworks specifications guaranteeing network compatibility.
Lonworks interface features
- Certified for Lonmark application layer guidelines V3.2
- Lonworks FT-X1 Transceiver
- Up to 256 input + 256 output LonWorks Network Variables / Modbus Word Registers
- Amount and type of network variables configurable, data linking between Lonworks variables (SNVT's) and Modbus Registers
- Lonworks baudrate 78 kbit/s
- Includes LW Config Software Tool for Lonworks network setup
- 1x D-sub 9-pin male RS-232 configuration port
- 1x 5-pin, 5.08 Phoenix network connector
|
Order Code
|
AB7009
|
| Included components |
Configuration program LWTool, a DSUB connector
with screw terminals for the serial sub-network.
Installation Leaflet for the electrical installation
|
| Optional Accessories | USB-RS-232 configuration adapter (Order Code 019570) |
| Guarantee | 3 years |
