Cod: ASG4107 - Nombre: Anybus SG-gateway with EtherNet/IP Interface


Anybus SG-gateway with EtherNet/IP Interface

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Características destacadas

  • Connects IED (intelligent electrical devices) with IEC protocols to automation PLC systems using EtherNet/IP or Modbus TCP/RTU.
  • Easy way to transport I/O data from electrical equipment in the field to SCADA systems
  • Connects machines to PLC’s and VHP/Demand Response companies
  • Suppots several communication protocols (IEC61850 client/server, IEC60870-5-104 client/server, Modbus TCP client/server, Modbus RTU master/slave)
  • Transmission over *3G (*optional) or over Ethernet
  • Connects serial based electrical equipment over a selectable RS232/RS485/RS422 interface
  • Easy web based configuration using any standard browser
  • Robust metal housing for stand-alone operation with DIN rail mounting
  • Global free technical support and consulting services
Dimensions  (L•W•H) 73 x 46x 103 mm or 2,75 x 1,81 x 4,14 inches
Weight 700 g or 1.54 lbs 
Operating temperature0 to +55 °C  or  +32 to +131 °F
Enclose material Continuously hot-dip aluminium-zinc coated steel sheet 
Power supply24 VDC  
Current consumption Typical 120mA at 24 VDC plus digital outputs
LED indicatorsx5 
SD card slot Supporting MMC and SD cards 
Ethernet connector1x 10/100 BaseT RJ45
EtherNet/IP connectors2x 100 Mbit/s BaseT RJ45 available simultaneously
Serial connector1x D-sub 9-pin Male 
*Cellular Modem 3G Tri Band UTMS modem (*optional together with SIM card slot)  
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
Supported protocols IEC61850 Client/Server, IEC60870-5-104 Client/Server, EtherNet/IP Adapter, Modbus TCP Client/Server, Modbus RTU Master/Slave  
Profile support VHP ready  
Required software CHIPtool for IP configuration 
Config method Integrated webserver  

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Remote terminal unit for smart grid applications

The SG-gateway with EtherNet/IP implements a real-time EtherNet/IP adapter interface with an integrated 2-port switch, allowing seamless network integration regardless of network topology (line, star, bus).

The SG-gateway supports the communication protocols used in the energy sector, e.g. IEC60870-5-104, DNP3 and IEC61850 and enables connectivity for energy devices to EtherNet/IP-based PLC systems.

In addition to EtherNet/IP and IEC protocols, other electric equipment in the field can also be connected via an Ethernet interface and/or a serial port, using the protocols Modbus TCP and RTU.  As an option, the SG-gateway can also include a 3G modem for remote connectivity.

EASY WEB-PLC programming

The application logic can be programmed on the device either using the integrated graphical web editor. The graphical web editor is a very intuitive and easy to use interface to program software applications and configure the gateway.

EtherNet/IP Adapter/Slave interface

    • Support for Generic Device profile
    • Dual port cut-through switch implemented in the Anybus NP40 processor
    • Device Level Ring (DLR) Beacon-based
    • Supports QuickConnect Class B
    • CIP energy object support
    • CIP safety in preparation (hardware prepared) 
    • Customized identity information
    • Explicit messaging up to 1500 using Large Forward Open
    • Multiple I/O assembly support
    • Modular device support
    • 2x RJ-45 EtherNet/IP 100 Mbit/s ports available simultaneously

    Additional Interface features

    Ethernet Interface

    • 10/100 Mbit/s
    • Supports Modbus TCP Client/Server
    • Connects up to 32 server devices and 128 values
    • IT features: OpenVPN client, DHCP server, integrated
      Firewall, SNTP, COM server, NAT routing

    Serial Interface

    • Selectable RS-232/422/485
    • Supports Modbus RTU Master/Slave
    • Connects up to 32 serial slave devices and 128 values
    • Serial baud rate 300 bps - 921,6 kbps

    IEC61850 (optional)

    • Client/Server functionality
    • Up to 40 data objects and 120 data attributes

    IEC60870-5-104 (optional)

    • Client/Server functionality
    • Up to 512 values

    3G Modem (optional)

    • SMS Send and Receive
    Order Code  ASG4107 (IEC60870-5-104 client/server and IEC61850 client/server + 3G)                           
    Additional Order Codes ASG4106 (IEC60870-5-104 client/server and IEC61850 client/server) ASG4105 (IEC61850 client/server + 3G) ASG4104 (IEC61850 client/server) ASG4103 (IEC60870-5-104 client/server + 3G) ASG4102 (IEC60870-5-104 client/server) ASG4101 (3G modem NO IEC support) ASG4100 (NO 3G modem NO IEC support)  
    Included components             SD memory card Power connector (Weidmüller BL 3.50/3)  3G Antenna (Included only when ordering a 3G version) (Power supply NOT included)  
    Required softwareCHIPTool (for IP configuration - Freeware)  Downloadable under "Files and Documentation"  
    Guarantee3 years  
    Bienvenido a ER-Soft.
    ER-Soft con la ley orgánica de protección de datos
    Política de cookies.
    Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
    Si continúa navegando, consideramos que acepta su uso.
    Más información pulsando aquí

    ¿Necesitas ayuda? Click

    ayuda ER-Soft
    Consulta a ER-Soft. *




    * *Campos obligatorios.

    *Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos