Cod: ASG1107 - Nombre: Anybus SG-gateway with M-Bus Master interface

Anybus
Anybus SG-gateway with M-Bus Master

Anybus SG-gateway with M-Bus Master interface

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Características destacadas

  • M-Bus Master interface for reading up to 32 energy meters 
  • Easy way to transport I/O data from electrical equipment in the field to SCADA systems
  • Connects IED (intelligent electrical devices) with IEC protocols to automation PLC systems
  • Connects machines to PLC’s and VHP/Demand Response companies
  • Supports several communication protocols (IEC61850 client/server, IEC60870-5-104 client/server, Modbus TCP client/server, Modbus RTU master/slave)
  • Transmission over *3G (*optional) or over Ethernet
  • Connects serial based electrical equipment over a selectable RS232/RS485/RS422 interface
  • Easy web based configuration using any standard browser
  • Robust metal housing for stand-alone operation with DIN rail mounting
  • Global free technical support and consulting services
Dimensions  (L•W•H) 73 x 46x 103 mm or 2,75 x 1,81 x 4,14 inches (+ 5.1mm height for versions with 3G modem)
Weight 700 g or 1.54 lbs 
Operating temperature0 to +55 °C  or  +32 to +131 °F
Enclose material Continuously hot-dip aluminium-zinc coated steel sheet 
Power supply24 VDC  
Current consumption Typical 120mA at 24 VDC plus digital outputs
LED indicatorsx5 
SD card slot Supporting MMC and SD cards 
Ethernet connector1x 10/100 BaseT RJ45
M-Bus I/O connectorWeidmüller BL 3.50/10
Serial connectorD-sub 9-pin Male 
*Cellular Modem 3G Tri Band UTMS modem (*optional together with SIM card slot)  
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
Supported protocols IEC61850 Client/Server, IEC60870-5-104 Client/Server, M-Bus Master, Modbus TCP Client/Server, Modbus RTU Master/Slave  
Profile support VHP ready  
Required software CHIPtool for IP configuration 
Config method Integrated webserver  
CertificationsCE 

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Remote terminal unit for smart grid applications
The SG-gateway is a remote terminal unit for the energy market with an M-Bus Master interface for reading up to 32 remote energy meters. In addition, it includes 2 digital S0 inputs and 2 digital outputs.

The SG-gateway supports the communication protocols used in the energy sector, e.g. IEC60870-5-104, DNP3 and IEC61850. The gateway can support other connected electric equipment in the field, via an Ethernet interface and/or a serial port, using the protocols Modbus TCP and RTU.  As an option, the SG-gateway can also include a 3G modem for remote connectvity.

EASY WEB-PLC programming
The application logic can be programmed on the device either using the integrated graphical web editor. The graphical web editor is a very intuitive and easy to use interface to program software applications and configure the gateway.

Interface features

M-Bus master Interface

  • Reads up to 32 energy meters
  • Up to 5 Km @ 300 bps AWG15

           

IEC61850 (optional)

  • Client/Server functionality
  • Up to 40 data objects and 120 data attributes

I/O Interface

  • 2x SO digital Inputs 
  • 2x digital Outputs

 

IEC60870-5-104 (optional)

  • Client/Server functionality
  • Up to 512 values

Serial Interface

  • Selectable RS-232/422/485
  • Supports Modbus RTU Master/Slave
  • Connects up to 32 serial slave devices and 128 values
  • Serial baud rate 300 bps - 921,6 kbps

 

3G Modem (optional)

  • SMS Send and Receive

Ethernet Interface

  • 10/100 Mbit/s
  • Supports Modbus TCP Client/Server
  • Connects up to 32 server devices and 128 values
  • IT features: OpenVPN client, DHCP server, integrated
    Firewall, SNTP, COM server, NAT routing
   
Order Code  ASG1107 (IEC60870-5-104 client/server and IEC61850 client/server + 3G)                           
Additional Order Codes ASG1106 (IEC60870-5-104 client/server and IEC61850 client/server) ASG1105 (IEC61850 client/server + 3G) ASG1104 (IEC61850 client/server) ASG1103 (IEC60870-5-104 client/server + 3G) ASG1102 (IEC60870-5-104 client/server) ASG1101 (3G modem NO IEC support) ASG1100 (NO 3G modem NO IEC support)  
Included components             SD memory card Power connector (Weidmüller BL 3.50/3)  M-Bus/IO connector (Weidmüller BL 3.50/10) 3G SMA Antenna (Included only when ordering a 3G version) (Power supply NOT included)  
Required softwareCHIPTool (for IP configuration - Freeware)  Downloadable under "Files and Documentation"  
Guarantee3 years  
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X