Cod: ASG4207 - Nombre: Anybus SG-gateway with PROFIBUS Interface

Anybus
sg-gateway-profibus

Anybus SG-gateway with PROFIBUS Interface

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Características destacadas

  • Connects IED (intelligent electrical devices) with IEC protocols to automation PLC systems using PROFIBUS or Modbus TCP/RTU.
  • Easy way to transport I/O data from electrical equipment in the field to SCADA systems
  • Connects machines to PLC’s and VHP/Demand Response companies
  • Supports several communication protocols (IEC61850 client/server, IEC60870-5-104 client/server, Modbus TCP client/server, Modbus RTU master/slave)
  • Transmission over *3G (*optional) or over Ethernet
  • Connects serial based electrical equipment over a selectable RS232/RS485/RS422 interface
  • Easy web based configuration using any standard browser
  • Robust metal housing for stand-alone operation with DIN rail mounting
  • Global free technical support and consulting services
Dimensions  (L•W•H) 73 x 46x 103 mm or 2,75 x 1,81 x 4,14 inches (+ 5.1mm height for versions with 3G modem)
Weight 700 g or 1.54 lbs 
Operating temperature0 to +55 °C  or  +32 to +131 °F
Enclose material Continuously hot-dip aluminium-zinc coated steel sheet 
Power supply24 VDC  
Current consumption Typical 120mA at 24 VDC plus digital outputs
LED indicatorsx5 
SD card slot Supporting MMC and SD cards 
Ethernet connector1x 10/100 BaseT RJ45
PROFIBUS connector1x D-sub 9-pin Female
Serial connector1x D-sub 9-pin Male 
*Cellular Modem 3G Tri Band UTMS modem (*optional together with SIM card slot)  
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
Supported protocols IEC61850 Client/Server, IEC60870-5-104 Client/Server, PROFIBUS-DP/DPV1, Modbus TCP Client/Server, Modbus RTU Master/Slave  
Profile support VHP ready  
Required software CHIPtool for IP configuration 
Config method Integrated webserver  
CertificationsCE 

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Remote terminal unit for smart grid applications

The SG-gateway with PROFIBUS implements a a Profibus DP/DPV1 slave interface. The SG-gateway supports the communication protocols used in the energy sector, e.g. IEC60870-5-104, DNP3 and IEC61850 and enables connectivity for energy devices to PROFINET-based PLC systems.

In addition to PROFIBUS and IEC protocols, other electric equipment in the field can also be connected via an Ethernet interface and/or a serial port, using the protocols Modbus TCP and RTU.  As an option, the SG-gateway can also include a 3G modem for remote connectivity.

EASY WEB-PLC programming

The application logic can be programmed on the device either using the integrated graphical web editor. The graphical web editor is a very intuitive and easy to use interface to program software applications and configure the gateway.

PROFIBUS Slave interface

  • Supports PROFIBUS DPV1 functionality
  •  Automatic baud rate detection
  • Generic and PROFIBUS specific diagnostic support
  • User Parameterization Data support
  • Set Slave Address support
  • ADI access via DP-V1 read/write services
  • Max 244 bytes Input and 244 bytes Output data
  • Device identity customization
  • Generic GSD file provided
  • Support for Modular Device Mode
  • 1x 9-pin D-SUB female connector to PROFIBUS

Additional Interface features

Ethernet Interface

  • 10/100 Mbit/s
  • Supports Modbus TCP Client/Server
  • Connects up to 32 server devices and 128 values
  • IT features: OpenVPN client, DHCP server, integrated
    Firewall, SNTP, COM server, NAT routing

Serial Interface

  • Selectable RS-232/422/485
  • Supports Modbus RTU Master/Slave
  • Connects up to 32 serial slave devices and 128 values
  • Serial baud rate 300 bps - 921,6 kbps
           

IEC61850 (optional)

  • Client/Server functionality
  • Up to 40 data objects and 120 data attributes

IEC60870-5-104 (optional)

  • Client/Server functionality
  • Up to 512 values

3G Modem (optional)

  • SMS Send and Receive
Order Code  ASG4207 (IEC60870-5-104 client/server and IEC61850 client/server + 3G)                           
Additional Order Codes ASG4206 (IEC60870-5-104 client/server and IEC61850 client/server) ASG4205 (IEC61850 client/server + 3G) ASG4204 (IEC61850 client/server) ASG4203 (IEC60870-5-104 client/server + 3G) ASG4202 (IEC60870-5-104 client/server) ASG4201 (3G modem NO IEC support) ASG4200 (NO 3G modem NO IEC support)  
Included components             SD memory card Power connector (Weidmüller BL 3.50/3)  3G Antenna (Included only when ordering a 3G version) (Power supply NOT included)  
Required softwareCHIPTool (for IP configuration - Freeware)  Downloadable under "Files and Documentation"  
Guarantee3 years  
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X