Características destacadas
- Configure or troubleshoot industrial machinery over a wireless network
- Increase flexibility and mobility. Eliminate expensive fixed HMI’s by using a laptop, tablet or smartphone
- Connect to moving field equipment such as an AGV’s (Automated Guided Veicles)
- Connect to a Cloud Service of your choice or get live data and integrate it into a SCADA system
- Support for CAN based devices and machines
- Supports Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, TCP/UDP
- Unique method to handle interference disturbances without consequences to the Bluetooth conformity or the interoperability with other devices
- Uses Dual-band Wi-Fi 2.4/5 GHz to connect easier and identify interference-free channels
- All-in-one package: Connector, communication processor and integrated antenna in the same unit
- Includes a configurable Digital Input to control e.g. roaming behavior. Max. 3m signal cable
- Uses the ARM mbed 3.0 IoT Device Platform.
- Simultaneous operation of Bluetooth and WLAN allowing for bridging and redundancy between the two networks
- Security features for a secure industrial operation
Descripción
Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).
On the wired side, the Anybus Wireless Bolt communicates over CAN and Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.
CONFIGURE MACHINES WIRELESSLY
Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI. A machine operator or technician does not need to be physically located at the machine to gain access.
an all-in-one solution
With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class. Regardless
of communication method
you select, you have the same connector (2x9p
Plug Connector) for both power and communication.
Configuration
|
|
|
|
Mounting
|
You can configure the Anybus Wireless Bolt simply by accessing the built-in web pages in the product. In addition, you can also send AT commands or use Easy Config modes
|
|
|
|
The Anybus Wireless Bolt is mounted into a 50.5 mm (M50) hole in the host device. The top "helmet” goes on the outside and provides an IP67 exterior. The bottom is located inside the machine or cabinet (IP21). |
|
|
|
|
|
|
Interface features
wlan (wifi) interface
- Supports Dual-Band WLAN 2.4/5 Ghz frequency
- Conforms to IEEE802.11 a/b/g/d/e/i/h specification
- Operates as an Access point or Client
- Connects up to 7 Slaves as an Access point
- Max throughput: 20 Mbps
- Max Range: 100 meters
- Security support: WEP64, WEP128,WPA-PSk, WPA2-PSk, TkIP, CCMP (AES) and LEAP, PEAP
ETHERNET FEATURES
- Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support
- Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
- Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over
CAN INTERFACE
- Isolated CAN
- Max baud rate 1 Mbps
|
|
BLUETOOTH INTERFACE
- Supports Bluetooth v4.0
- Supports profiles: SPP, DUN PANU & NAP
- Operates as an Access point or Client
- Connects up to 7 Slaves as an Access point
- Max throughput: 1 Mbps
- Max Range: 100 meters
- Security support: Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved
BLUETOOTH LOW ENERGY INTERFACE (pending)
- Supports Bluetooth v4.0
- Supports profiles:GATT
- Operate mode: Central or Peripheral
- Connects up to 10 Slave for Central
- Max throughput: 200 Kbps
- Max Range: 100 meters
- Security support: AES-CCM cryptography
DIGTITAL INTERFACE
- Digital Input to control e.g. roaming behavior. Max. 3m signal cable
|
|
Order Code
|
AWB2020 (Available from Q1 2017)
| |
| Included components |
Quick start guide, manuals. (Power supply not included)
| |
| Guarantee | 3 years | |
