Anybus X-gateway – Ethernet Adapter/Server – J1939

Características destacadas

  • Monitor and control data on a J1939 heavy duty vehicle network from an Ethernet-based PLC system or device
  • Support for EtherNet/IP or Modbus TCP protocols
  • Typical applications: Electric Power Generation, Oil & Gas, Marine, Military, Heavy Duty Vehicles, Any Diesel Engine based system supporting J1939
  • Max 500 bytes of I/O data in each direction
  • Easy configuration via the included BWConfig Windows Software. No programming required
  • 10/100 Mbit/s Ethernet adapter interface with IT functionality: HTTP server, FTP server, Telnet server and Email client
  • Robust aluminum stand-alone housing
  • Global free technical support and consultancy


The Anybus X-gateway allows you to monitor and control data on a J1939 heavy duty vehicle network from an Ethernet-based PLC system or device. The EtherNet/IP and Modbus TCP protocols are supported.


Data from J1939 messages are mapped to I/O table locations, making them accessible to the Ethernet network. The X-gateway acts as an EtherNet/IP Adapter, allowing J1939 data to be transferred to an EtherNet/IP Scanner device using I/O or explicit messages. The module acts as a Modbus TCP server, allowing J1939 data to be addressed as Modbus registers by a Modbus TCP client device.



HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway Ethernet interface.


Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway Ethernet interface.

J1939 interface

  • SAE J1939 network interface with a unique network address in accordance to the J1939-81 specification
  • Max 496 bytes of I/O Input data and 492 bytes of I/O Output Data
  • Up to 120 PGN's monitored by Input data points
  • Up to 100 PGN's  transmitted by Output data points  
  • Supports J1939 network baud rates of 250K and 500K
  • Transmission and reception of all types of fixed-length J1939 messages, including PDU1, PDU2, broadcast and destination specific
  • Monitoring of DM1 (active diagnostics) and DM2 (previously active diagnostics) messages
  • Complete network address management including address claim, protection, and yield on higher priority conflict
  • Network address can be self-configurable over a range of addresses
  • J1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes). Both connection based (RTS/CTS) and broadcast (BAM) are supported
  • Configurable CAN bus-off reset option will reset the network interface and attempt to return to online when a CAN bus-off condition is detected
  • 1x 5-pole 5.08 mm Phoenix pluggable screw connector for J1939

Ethernet interface

Ethernet settings can be made either via the included BWConfig Windows Software or for EtherNet/IP, by importing the provided .EDS file into engineering tool of the controlling PLC. 

  • Supports EtherNet/IP or Modbus TCP protocols
  • Supports the EtherNet/IP protocol, Adapter Class with I/O Server, and Message Server
  • Supports the Modbus/TCP protocol with up to 8 simultaneous connections and conforms to the Modbus/TCP specification 1.0
  • 10/100Mbit operation (auto detect)
  • IT Functionality: HTTP server, FTP server, Email client, and a Telnet server.
  • IP address settings via DHCP/Bootp, web page, or the Anybus X-gateway Configuration Tool.
  • 1x RJ-45 Ethernet port
Order Code AB7665
Price groupA
Included components Resource CD with "BWConfig" Windows software, Manuals, RS-232 configuration cable, Installation Guide,  5-pole 5.08 mm Phoenix pluggable screw J1939 connector 2-pole 5.08 mm Phoenix pluggable screw connector (Power supply not included)
Order information USA & Canada Please contact  +1 312 829 0601 for ordering information within the USA and Canada    
Guarantee3 years 

Especificaciones Tecnicas

Dimensions (L•W•D) 126 x 110 x 42mm or 4,96 x 4,33 x 1,65"
Weight500g or 1,10 lbs
Operating temperature0 to +70 °C or +32 to +158 °F
Storage temperature-25 to +85 °C or -13 to +185 °F
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption max. 300mA (Typical 200mA)
Enclosure material Aluminium
Installation positionVertical
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
Configurationvia 9-pin DSUB RS-232 port with the included BWConfig Windows software
CertificationsCE, CULUS

Referencia Descripcion
AB7665 Anybus X-gateway – Ethernet Adapter/Server – J1939
Si continuas utilizando este sitio aceptas el uso de cookies. más información