Anybus X-gateway – Lonworks Slave - Modbus Plus Slave

Características destacadas

  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

Descripción

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Lonworks and Modbus Plus networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Lonworks Slave interface

Lonworks network variables and configuration is made via an included configuration tool

  • Certified for Lonmark application layer guidelines V3.2
  • Lonworks FT-X1 Transceiver
  • Up to 256 input + 256 output LonWorks Network Variables / Modbus Word Registers
  • Amount and type of network variables configurable, data linking between Lonworks variables (SNVT's) and Modbus Registers
  • Lonworks baudrate 78 kbit/s
  • Includes LW Config Software Tool for Lonworks network setup
  • 1x D-sub 9-pin male RS-232 configuration port 
  • 1x 5-pin, 5.08 Phoenix network connector

Modbus Plus Slave Interface 

Modbus Plus address settings made via on-board DIP switches

  • Complete Modbus Plus slave functionality
  • Up to 32 words of global (cyclic I/O) data in each direction
  • Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
  • Point-to-point parameter data (up to 125 words)
  • Onboard Node ID and Source ID switches
  • Modbus Plus baudrate 1 Mbit/s
  • 1x D-sub 9-pin female network connector
Order Code AB7825
Price groupC
Included components     Resource CD, USB configuration cable, Quick start guide, manuals. Anybus Configuration Manager software. For bulk pack orders, all configuration software can be downloaded under "files and documentation" from this website. (Power supply not included)
Optional Accessories *Extra wide DIN-clip for flat mounting (Order Code SP1784)   
Guarantee3 years 

Especificaciones Tecnicas

Dimensions (L•W•H) 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C or -13 to +149 °F
Storage temperature-40 to +85 °C or -40 to +185 °F
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Referencia Descripcion
AB7625 Anybus X-gateway – Lonworks Slave - Modbus Plus Slave
Si continuas utilizando este sitio aceptas el uso de cookies. más información