Cod: AB9007 - Nombre: Anybus X-gateway - Modbus TCP Client - PROFINET-IO Device

Anybus
X-gateway-mtcpm-pnts

Anybus X-gateway - Modbus TCP Client - PROFINET-IO Device

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus TCP and PROFINET networks.

Características destacadas

  • Fast copying of cyclic I/O data between a Modbus TCP and a PROFINET network (5 ms)
  • Allows for the integration of Modbus TCP based server/slave devices into other PLC control systems
  • Fulll Modbus TCP Client/Master functionality, eliminates the need for an PLC controller on the Modbus TCP network
  • Connects up to 64 Modbus Servers/Slave devices
  • Max I/O data capacity of 256 bytes in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • SD memory card slot allows for backup, configuration and easy module replacement
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 110 x 35 x 101 mm or 4,33 x 1,38 x 3,98"                                                     
Weight160g or 0,35 lbs
Operating temperature-25 to +70 °C  or  -13 to +158 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
USB portFor firmware upgrades
SD memory card slot For backup, configuration and easy replacement 
Modbus TCP connector2x RJ45
Fieldbus/Ethernet connector(See the secondary network interface details above)
Galvanic isolation On both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard) or Wall Mount (optional)
CertificationsCE, CULUS, ATEX/Haz.Loc 

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus TCP and PROFINET networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks.This offloads your PLC from working with additional calculations. The gateway acts as a Device on the PROFINET-IO network and as a full Master/Client on the Modbus TCP network. The data transmission between the two networks is completely transparent with a maximum I/O data capacity of 256 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

Configuration is made via Ethernet and a built-in web page. The configuration page is used to configure Ethernet TCP/IP settings, Modbus TCP client/server configuration and I/O data size transfer between Modbus TCP and the chosen network.

Modbus TCP Client/Master interface

Modbus TCP Client and Server setup is made via an included visual web configuration interface without the need for any programming.

  • Modbus TCP Client functionality according to Modbus specification V1.1B 
  • Support for Modbus TCP functions 1, 2, 3, 4, 5, 6, 15, 16, 23
  • Connects up to 64 Modbus TCP servers/slaves
  • Supports up to max 256 bytes of Input and 256 bytes of Output data
  • 10/100Mbit operation in full or half-duplex
  • Integrated FTP server provides easy file management using standard FTP clients
  • Web server with dynamic data capability and Server Side Include (SSI) capability
  • Email client with dynamic data capability and Event-triggered email handling
  • Downlink Live List providing Modbus-TCP transaction status to uplink PLC
  • Control and Status words for downlink network control/status
  • Individual Modbus TCP server port number setting
  • Byte Swap feature
  • Full Modbus address range (1-65536)
  • Dual Modbus TCP RJ-45 ports available simultaneously
     

PROFINET I/O Device/Slave interface 

PROFINET IO Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC. 

  • Complete PROFINET-IO Soft-Real-Time (RT) communication
  • Max 512 bytes of Input and 512 bytes of Output data
  • Up to 64 slots / 1 sub slot
  • Cyclic data exchange (10 ms cycle time)
  • Acyclic Data exchange (Record Data Requests) 
  • Baud rate 100 Mbit/s
  • Integrated FTP server provides easy file management using standard FTP clients
  • Web server with dynamic data capability and Server Side Include (SSI) capability
  • Email client with dynamic data capability and Event-triggered email handling
  • TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
  • PROFINET uplink configuration via web interface or .GSDML file
  • Integrated switch allowing for a daisy-chain topology
  • Dual RJ-45 network ports available simultaneously
Order Code  AB9007
Stock Item YES 
Included components             Resource CD, Quick start guide, manuals.  Anybus OPC server software. (single-piece only) For bulk pack orders,all configuration software can be downloaded under "files and documentation" from this website. (Power supply not included)
Optional Accessories Wall mount bracket (Order Code 021520-B) 256 MB SD memory card (Industrial grade) (Order Code 021530-B) Anybus IPconfig Tool - Utility for module TCP/IP configuration (Windows 32/64-bit)  Downloadable under "Files and Documentation"
Guarantee3 years 
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X