Anybus X-gateway – PROFIBUS Slave – EtherNet/IP Adapter

Características destacadas

  • Fast copying of cyclic I/O data between PROFIBUS and EtherNet/IP networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

Descripción

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFIBUS and EtherNet/IP networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on the PROFIBUS network and as an Adapter on the EtherNet/IP network. The data transmission between the two networks is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

PROFIBUS Slave interface

PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC. 

  • Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
  • Supports Class 1 & Class 2 services
  • Automatic baudrate detection up to 12Mbit/s
  • Supports PA baud rate 45.45 kbit/s
  • Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 328 bytes total (in+out)
  • Acyclic User Parameter data / Diagnostics length - up to 237 bytes
  • Supports PROFIBUS features: Sync and Freeze and Watchdog
  • PROFIBUS slave settings via on-board switches or vis .GSD file
  • 1x D-sub 9-pin female PROFIBUS connector

EtherNet/IP Adapter/Slave interface

EtherNet/IP adapter settings can be made either via the built-in web interface, or by importing the provided .EDS file into engineering tool of the controlling PLC. 

    • EtherNet/IP CONFORMANCE TESTED™ by ODVA 
    • EtherNet/IP Level 2 I/O Server CIP
    • 10/100Mbit operation in full or half-duplex
    • Max. 509 bytes Input and 505 bytes Output data
    • Device Level Ring (DLR) functionality available (announce-based ring participant)
    • Integrated FTP server provides easy file management using standard FTP clients.
    • Web server with dynamic data capability and Server Side Include (SSI) capability
    • Email client with dynamic data capability and Event-triggered email handling
    • Per-user security framework
    • Quality of Service (QoS) available
    • DNS Capability
    • TCP/IP settings via DHCP/ARP/Anybus IPconfig (HICP)
    • Integrated switch allowing for a daisy-chain topology
    • 2x RJ-45 EtherNet/IP ports available simultaneously
    Order Code  AB7832
    Stock ItemYES
    Included components             Resource CD, USB configuration cable, Quick start guide, manuals.  Anybus Configuration Manager software. Anybus OPC server software. (single-piece only) For bulk pack orders,all configuration software can be downloaded under "files and documentation" from this website. (Power supply not included)
    Optional Accessories *Extra wide DIN-clip for flat mounting (Order Code SP1784) Anybus IPconfig Tool - Utility for module TCP/IP configuration (Windows 32/64-bit)  Downloadable under "Files and Documentation"
    Guarantee3 years 

    Especificaciones Tecnicas

    Dimensions (L•W•H) 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight400g or 0,880 lbs
    Operating temperature-25 to +65 °C or -13 to +149 °F
    Storage temperature-40 to +85 °C or -40 to +185 °F
    Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
    Current consumption max. 400mA (Typical 200mA)
    Enclosure material Aluminium and plastic
    Installation positionVertical / Flat*
    Galvanic isolationYES, on both BUS/Ethernet side
    Mechanical ratingIP20, NEMA rating 1
    MountingDIN-rail (EN 50022 standard)
    I/O configurationvia USB port with Anybus Configuration Manager software
    CertificationsCE, CULUS, ATEX/Haz.Loc

    Referencia Descripcion
    AB7832 Anybus X-gateway – PROFIBUS Slave – EtherNet/IP Adapter
    Si continuas utilizando este sitio aceptas el uso de cookies. más información