Características destacadas
- Fast copying of cyclic I/O data between the two networks (10-15 ms)
- Proven and tested with all PLC manufacturers
- Supports up to a maximum of 512 bytes of Input and Output data in each direction
- Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
- Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
- Optional control status information added to I/O data for diagnostic purposes
- Robust stand-alone housing for use in harsh industrial environments
- Global free technical support and consultancy
Descripción
The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFINET-IRT and PROFIBUS networks.
FAST COPYING OF I/O DATA
The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Device/Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.
EASY CONFIGURATION - NO PROGRAMMING REQUIRED!
The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.
PROFINET IRT Device/Slave interface
PROFINET IRT Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC.
- Complete PROFINET-IRT Isochronous -Real-Time (IRT) communication
- Max 220 bytes of Input and 220 bytes of Output data
- Acyclic Data exchange (Record Data Requests)
- Up to 17 slots / up to 4 subslots per slot (1 by default)
- Baud rate 100 Mbit/s fixed
- Integrated FTP server provides easy file management using standard FTP clients
- Web server with dynamic data capability and Server Side Include (SSI) capability
- Email client with dynamic data capability and Event-triggered email handling
- Built in file system with per-user security framework
- SNMP-MIBII support
- Modbus-TCP server (read-only)
- TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
- LLDP (Linked Layer Discovery Protocol)
- Support for I&M (Identification & Maintenance )
- PROFINET uplink configuration via .GSDML file
- Integrated switch allowing for a daisy-chain topology
- Dual RJ-45 network ports available simultaneously
PROFIBUS Slave interface
PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC.
- Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
- Supports Class 1 & Class 2 services
- Automatic baudrate detection up to 12Mbit/s
- Supports PA baud rate 45.45 kbit/s
- Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 328 bytes total (in+out)
- Acyclic User Parameter data / Diagnostics length - up to 237 bytes
- Supports PROFIBUS features: Sync and Freeze and Watchdog
- PROFIBUS slave settings via on-board switches or vis .GSD file
- 1x D-sub 9-pin female PROFIBUS connector
|
Order Code
|
AB7913
|
| Price group | C |
| Included components |
Resource CD, USB configuration cable, Quick start guide, manuals.
Anybus Configuration Manager software.
Anybus OPC server software. (single-piece only)
For bulk pack orders,all configuration software can be downloaded under
"files and documentation" from this website.
(Power supply not included)
|
| Optional Accessories |
*Extra wide DIN-clip for flat mounting (Order Code SP1784)
Anybus IPconfig Tool - Utility for module TCP/IP configuration (Windows 32/64-bit)
Downloadable under "Files and Documentation"
|
| Guarantee | 3 years |
