Baltos iR 3220
Características destacadas
- Sitara AM3352 Cortex-A8 @ 600MHz
- 256MB DDR3
- 256MB NAND Flash (for boot)
- 1 x SD-Slot
- 3 x LAN (1 Gigabit, 2 Fast Ethernet)
- 2 x USB 2.0 Host
- 2 x RS232/422/485
- 8 x Digital-I/O (4 Input, 4 Output)
- 1 x I²C
- 1 x mPCIe-slot for 3G/4G-Modem, GPS and other
- 1 x SIM card slot
- 1 x WLAN 802.11b/g/n (optional)
- 2 x antenna sockets (optional)
- 1 x Console serial Port
- Low Power, fanless, no cables
- Operating Temperature −20°C - 65°C
- Debian GNU/Linux
- DIN RAIL mountable
- Starter kit available
Descripción
OnRISC Baltos iR 3220 is a fanless industrial embedded PC in compact dimensions, designed for DIN Rail mounting. It is based on an ARM Cortex-A8 with NEON SIMD Coprocessor, up to 1GHz CPU clock speed. Low power consumption, wide temperature range -20°C to 65°C and flexible power supply (12-50V DC) make it an ideal system for industrial automation.
The system allows extension with GPS and GSM/3G/4G communication, so installation on mobile bases is possible. WLAN is available as usual, two locations for antenna sockets are provided. Models with further extended temperature range are available, allowing for remote installations.
The great variety of interfaces like LAN, serial ports, USB, I²C, Digital I/O plus more options makes it easy to connect various industrial devices and field buses to the Baltos.
The embedded computer runs Linux on ARM operating system Kernel 3.18. This system is installable on the internal NAND Flash memory, or on an SD card in the front side slot. For boot from NAND Flash a system configuration with buildroot is supported. With Debian's repository database it is easy to install and update the free software on the Baltos. VS provides information for configuration and sample installations of Linux for Baltos.
| 6831 | OnRISC Baltos iR 3220+DS9 |
| Packing list |
|
| Options | |
| 6689 | WLAN Kit internal internal module 802.11b/g/n, pigtail and antenna Purchase time option, not for later retrofitting |
| 6690 | WLAN Kit external USB stick 802.11b/g/n, antenna |
| 6031 | Power supply adapter 12V DC, 1A |
| Request | Boot SD with Debian GNU/Linux installed (4/8GB) |
| 3304 | GSM/UMTS mPCIe card for 3G modem |
| 3306 | GSM/UMTS/LTE mPCIe card for 3G/4G modem |
| Request | GPS mPCIe card for use of active antenna |
| 6835 | Starter Kit 4GB SD card for LinuxPower adapter 12V @ 1AAdapter cable for console portDocumentation and Development Software on DVD |
| >Back to top | |
Especificaciones Tecnicas
| System | |
| Hardware | Sitara AM3352 ARM Cortex-A8 RISC CPU @ 600MHz256MB DDR3Real time clock with battery backup |
| Mass Storage | 256MB NAND Flash memory (bootable)SD 2.0 / SDHC SD-card slot (bootable) |
| Network | 1x 1000/100/10 Mbps Gigabit Ethernet2x 100/10 Mbps on integrated Fast Ethernet Switch |
| Expansion Slots | 1x miniPCIe via USB 2.0 (for GPS, GSM/3G/4G card)SIM card for GSM/3G/4G modems in miniPCIe slot |
| Serial Peripherals | 2x USB 2.0 Host2x RS232/422/485 high speed1x Console Port RS2321x I²C |
| Digital Input/Output | 4x TTL Output signals (64mA sink / 32mA source)4x TTL Input signalsIRQ for input signalsTerminal block connector |
| LED | 1x Power, 1x 3G, 1x WLAN, 1x ApplicationLAN: 3x Link and Speed |
| Serial Ports | |
| Features | 2x RS232/422/485Highspeed UART, 64 Byte FIFO (16C750)RS232: up to 921.6/1000 kbpsRS422/485: up to 3.7 Mbps |
| Available Modes | Configured by DIP-Switch or Software RS232RS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex, without echo |
| Signals | RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2−wire: Data+/-, GNDRS485 4−wire: Tx+/-, Rx+/-, GND |
| RS485 Data Direction Control | Driver Automatic via RTS |
| Power and Environment | |
| Power | Input 12 - 50V DC0.2A @ 12V minimal0.8A @ 12V typical3-pin Terminal block connectorAuxiliary Output 5V @max. 0.5A on Digital-I/O connector |
| Temperature | Operating −20°C - 65°CStorage: −30°C - 85°CHumidity: 10-85% non-condensing |
| MTBF | n.a. |
| Approvals | EMC: FCC Class A, CE Class AEnvironment: RoHS |
| Mechanical | |
| Dimensions | 154×104×50 mm³ (W×L×H) |
| Weight | 0.55kg |
| Construction Material | 0.8mm Metalsheet black |
| Mounting | DIN RailWall mount |
| Software Specifications | |
| Linux | Debian:Latest stable release available as ready-to-run SD card image or can be built/customized via vsdebootstrap project (Github)Buildroot:BSP with Kernel and bootloader patches and basic configuration (Github)Yocto:layer-baltos with Kernel and bootloder patches suitable for new projects or integration into already available projects (Github)Buildroot and Yocto are suitable for installation to NAND Flash |
| Referencia | Descripcion |
|---|---|
| 6831 | OnRISC Baltos iR 3220+DS9 |
| Documentacion | Baltos iR 3220 Datasheet |
| Documentacion | Hardware Manual (Edition- September 2015) |
| Documentacion | User Manual (Edition- November 2015) |