Logo ER-Soft

CAN-CR220

Características destacadas

  • Line protection up to 4 kV
  • DIN/EN 50178 (DIN VDE 0160: 1988-05 and DIN VDE 0160/A1: 1989-04)
  • Cost savings due to simple wiring
  • Increased system reliability
  • Almost no influence on real-time behavior

Descripción

ISO 11898-2 CAN repeater
with 4 kV galvanic isolation

The CAN-CR220 is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV, allowing it be utilized in medical applications. One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

The galvanic isolation isolates the CAN segments from each other as well as from the power supply.

The CAN-CR220 is tested according DIN/EN 50178 (DIN VDE 0160: 1988-05 and DIN VDE 0160/A1: 1989-04).

Technical specifications

Display Transmit and defective segment (two duo LEDs), Power (one LED)
CAN bus interface ISO 11898-2 with CAN choke. Two Sub-D9 connectors. CAN termination resistors are integrated (switchable).
Baudrate Up to 888 kbps
Delay 200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply 9-32 V DC, 1.5 W typ., through terminals
Galvanic isolation CAN 1, CAN 2 and power supply are galvanic isolated against each other.

Isolation voltage 1.01.0067.44400
- 2,5 kV AC / 1 Min.
- 3,5 kV AC / 1 Sec.
- 4,0 kV DC / 1 Sec.

Isolation voltage 1.01.0067.44300
- 3,0 kV AC / 3 Min.
- 3,75 kV AC / 1 Min.
- 4,0 kV AC / 1 Sec.
Certification CE, FCC
Temperature range  -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 22.5 x 100 x 115 mm

 

Contents of delivery

  • CAN-CR220, Quick reference
 

Order number

1.01.0067.44400 CAN-CR220 (see technical data - galvanic isolation)
1.01.0067.44300 CAN-CR220 (see technical data - galvanic isolation)

 

Related products

Especificaciones Tecnicas

Display Transmit and defective segment (two duo LEDs), Power (one LED)
CAN bus interface ISO 11898-2 with CAN choke. Two Sub-D9 connectors. CAN termination resistors are integrated (switchable).
Baudrate Up to 888 kbps
Delay 200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply 9-32 V DC, 1.5 W typ., through terminals
Galvanic isolation CAN 1, CAN 2 and power supply are galvanic isolated against each other. Isolation voltage 1.01.0067.44400 - 2,5 kV AC / 1 Min. - 3,5 kV AC / 1 Sec. - 4,0 kV DC / 1 Sec. Isolation voltage 1.01.0067.44300 - 3,0 kV AC / 3 Min. - 3,75 kV AC / 1 Min. - 4,0 kV AC / 1 Sec.
Certification CE, FCC
Temperature range -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 22.5 x 100 x 115 mm

Referencia Descripcion
1.01.0067.44400 CAN-CR220
1.01.0067.44300 CAN-CR220
Documentacion Datasheet
Si continuas utilizando este sitio aceptas el uso de cookies. más información