Características destacadas
- Easy CAN access over large distances
- Common driver interface for easy exchange of the PC interface type
- Also abailable as gateway/bridge device
Descripción
Active Ethernet interface
1 x CAN (High-Speed)
The CAN@net II allows simple, flexible access from a PC to CAN systems via Ethernet. Due to its ability to support the TCP/IP protocol, the CAN@net II allows the worldwide direct connection to a PC, implementation in an LAN, or, communication with the gateway via the Internet.
With the VCI CAN driver, included in the delivery, the CAN@net II can be operated in the same way as all IXXAT CAN PC interface boards. Therefore, all VCI-based CAN-programs and tools can be run with the CAN@net II. The VCI CAN driver is also capable of communicating via a PC with up to 128 CAN@net II devices simultaneously.
In addition to the CAN@net II/VCI, IXXAT also offers the CAN@net II/Generic, which can be addressed via a standard TCP/IP socket or used as CAN-Ethernet-CAN bridge (see also CAN@net II/Generic in the section "CAN gateways/bridges").
Technical specifications
| Ethernet-Interface |
10/100 Mbit/s Ethernet (10Base-T/100Base-T),
Autodetect, Connector RJ45, Auto crossover
|
| IP address allocation |
DHCP, via PC tool
|
| Microcontroller |
Freescale MCF5235
|
| Memory extension |
8 MByte DRAM, 4 MByte Flash
|
| CAN controller |
SJA1000; CAN 2.0 A/B
|
| CAN bus interface |
ISO 11898-2, Sub D9 connector according to CiA 303-1
|
| Power supply |
9-32 V DC, 3 W
|
| Galvanic isolation |
1 kV, 1 sec.
|
| Size |
22.5 x 100 x 115 mm
|
| Housing |
Plastic housing for top hat rail mounting
|
| Temperature range |
-20 ºC ... +70 ºC
|
| Certification |
CE, FCC, CSA
|
Contents of delivery
- CAN@net II/VCI, manual
- CAN driver VCI for Windows 2000, XP, Vista, Windows 7
- Simple CAN monitor "miniMon"
Order number
1.01.0086.10200
|
CAN@net II/VCI; one CAN channel
|
Related products
