Características destacadas
- Bridging of large distances and easy remote system access using Ethernet
- Cost savings due to simple wiring
- Two independent CAN channels
- Windows configuration tool for easy configuration via USB or Ethernet
- Designed for high performance in harsh environments
Descripción
CAN-Ethernet gateway and CAN-Ethernet-CAN
bridge with two CAN channels
CAN@net NT 200 enables easy and flexible access to CAN systems via Ethernet. The device has two operating modes and can be used either as CAN-Ethernet-CAN bridge or as CAN-to-Ethernet gateway.
How it works
CAN-Ethernet Gateway
In gateway mode the CAN@net NT 200 can be directly accessed from e.g. Windows, Linux, VxWorks or QNX based systems as well as from embedded systems, by using a simple ASCII protocol over a standard TCP/IP socket. As CAN-Ethernet Gateway, the CAN@net NT 200 offers simple, flexible access to two independent CAN systems via a LAN or via the Internet.
CAN-Ethernet-CAN Bridge
Using two CAN@net NT 200, a CAN-Ethernet-CAN bridge can be implemented linking two independent CAN channels on each side. This bridge allows the exchange of CAN messages between CAN systems via TCP/IP over large distances – using an existing Ethernet-based infrastructure. The segmentation also increases the reliability and stability of the overall system.
Configuration and firmware update
Using an easy to operate Windows configuration tool, the CAN@net NT 200 can be configured and firmware updates can be performed via USB or Ethernet interface.
Technical specifications
| PC bus interface |
10/100 MBit/s, twisted pair, RJ45 connector
|
| CAN transceiver |
Texas Instruments SN65HVD251P
|
| Max. number of bus nodes |
120
|
| CAN bus termination resistor |
None
|
| CAN baudrates |
5 to 1000 kBaud
|
| Power supply |
9 V to 36 V DC
|
| Current consumption |
typically 110 mA (at 24 V input voltage)
|
| Temperature range |
Operating temperature -40 °C to +85 °C
Storage temperature -40 °C to +85 °C
|
| Galvanic isolation |
1 kV for 1 sec.
|
| Certification |
CE, FCC
|
| Housing |
Polyamide housing for top hat rail mounting
|
| Protection class |
IP20
|
| Size |
approx. 114.5 x 99 x 22.5 mm
|
| Weight |
approx. 150 g
|
Contents of delivery
- CAN@net NT 200
- User manual
- CD with CAN-Gateway Configurator
- Mini USB cable
Order number
| 1.01.0332.20000 |
CAN@net NT 200
|
Related products
