CP-132 PCI
Características destacadas
- 2x RS422 / RS485
- Support Automatic Data Direction Control (ADDC)
- Built-in termination resistors
- Compact board size (half-size), suitable for any PC cabinet
- On-chip hardware flow control, no data loss
- available as CP 132UL Universal
Descripción
The CP-132 series is designed for RS422 / 485 industrial communication. It supports 2 independent RS422 or RS485 ports, and each port can control up to 32 devices in a multidrop environment.
Applications can easily manage the data transmitting and r
| Application | |
| Multiport data acquisition Factory automation Remote serial device control | Industrial control Embedded industrial machine SCADA |
| Part Number | 733 |
Especificaciones Tecnicas
| Specification | |
| Hardware | |
| I/O controller | 2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO |
| Connector type | Male DB9 |
| Interface | |
| Bus interface | PCI version 2.1 (32bit) |
| Serial interface | RS422 / 485 |
| No. of ports | 2 |
| Signals | RS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GNDRS485 Data+/-, GND |
| RS485 data control | Auto (Automatic Data Direction Control) or by RTS |
| Built-in termination resistor | RS422 120 OhmRS485 120 Ohm, jumper enable / disable |
| Performance | |
| Speed | 50 - 921.6KbpsCP132UL, CP132UI PCI up to 230.4Kbps |
| Max. no. of ports | 8 (4 boards) |
| Configuration | |
| Parity | None, even, odd, space, mark |
| Data bits | 5, 6, 7, 8 |
| Stop bits | 1, 1.5, 2 |
| IRQ | Assigned by BIOS |
| I/O address | Assigned by BIOS |
| Power and Environment | |
| Power requirement | 430mA max.(+5V) |
| Operation temp. | 0°C - 55°C |
| Dimension | 120mm x 80mm |
| Operating Systems supported | Vista, XP, Windows 2000, Windows NT, Windows 95/98/ME, DOS |
| Referencia | Descripcion |
|---|---|
| 733 | 733 |
| Documentacion | CP-132 PCI Datasheet |
| Descargas | DOS |
| Descargas | Windows 2000 |
| Descargas | Windows 95-98-SE-ME |
| Descargas | Windows NT 4-0 |
| Descargas | Windows XP |