CP-132IS PCI

Características destacadas

  • 2x RS422 / RS485
  • Support Automatic Data Direction Control (ADDC)
  • Built-in termination resistors
  • Compact board size (half-size), suitable for any PC cabinet
  • On-chip hardware flow control, no data loss
  • Support optical isolation, max.

Descripción

The CP-132 series is designed for RS422 / 485 industrial communication. It supports 2 independent RS422 or RS485 ports, and each port can control up to 32 devices in a multidrop environment.
Applications can easily manage the data transmitting and r

Application
Multiport data acquisition Factory automation Remote serial device control Industrial control Embedded industrial machine SCADA
Part Number737

Especificaciones Tecnicas

Specification
Hardware
I/O controller 2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
Connector type Male DB9
Interface
Bus interface PCI version 2.1 (32bit)
Serial interface RS422 / 485
No. of ports 2
Signals RS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GNDRS485 Data+/-, GND
RS485 data control Auto (Automatic Data Direction Control) or by RTS
Built-in termination resistor RS422 120 OhmRS485 120 Ohm, jumper enable / disable
Performance
Speed 50 - 921.6Kbps
Max. no. of ports 8 (4 boards)
Configuration
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ Assigned by BIOS
I/O address Assigned by BIOS
Power and Environment
Power requirement 700mA max.(+5V)
Operation temp. 0°C - 55°C
Dimension 120mm x 110mm
Isolation Protection 2KV
Surge Protection 8KV ESD
Operating Systems supported Vista, XP,Windows 2000, Windows NT, Windows 95/98, DOS

Referencia Descripcion
737 737
Si continuas utilizando este sitio aceptas el uso de cookies. más información