DeviceNet Master Simulator
- Easy to use test and diagnostic tool for DeviceNet Adapters
- Read/Write of cyclic I/O data and explicit messaging data in various formats
- Automatic DeviceNet address search
- Automatic detection of I/O data size
- Works even without EDS-file
- Supports all standard DeviceNet baudrates
- Ideal for mobile usage with laptops Windows 7/Vista/NT/XP
The Master Simulator is an easy to use tool to test the DeviceNet Adapter/Slave functionality of any fieldbus device.
The automatic Slave identification functionality permits communication to almost any CANopen slave device even if the normally required EDS file is not available. Any DeviceNet Slave can be set into operation and afterwards clear and user friendly dialog boxes are used to exchange cyclic I/O data or acyclic explicit messages between the DeviceNet Slave and the Simulator.
The Master Simulator consist of a Windows based Software tool and a DeviceNet interface circuitry (Dongle). The Dongle is plugged into the USB port of the PC and provides on the other side a 9-pin D-Sub connector as the DeviceNet Interface. The Dongle is powered from USB port.
To connect a DeviceNet Slave, a DeviceNet cable and additionally the 24 Volt DeviceNet power supply is required. These components are recommended accessories and are not included in the scope of supply.
||67 x 41 x 20 mm
|Operating temperature||-0 to +55 °C|
|Power supply||Powered by the PC/Laptop USB port
|Max cable length
|PC connection via||USB|
|PC requirements||Win 9X/2K/ME/XP/7|
|Included components||DeviceNet Master Simulator USB dongle,
software CD, D-SUB connector
|Optional accessories||DeviceNet Cable-Kit
Order no: 017509
Consists of 2 m thin DeviceNet
cable with a 9-pin D-Sub and
one 5-pin pluggable screw
connector, power supply
cable, bus termination resistor.
|018410||The Master Simulator is an easy to use tool to test the DeviceNet Adapter/Slave functionality of any fieldbus device.|