FIMP
Características destacadas
- Industrial compact splicebox
Descripción
With 115 mm x 61 mm x 113 mm, our industrial splice box is by far smaller than comparable 19‘‘solutions.
Its inner values are really convincing as well so that the installation is quite simple and done very fast. FIMP is ready for splicing and contains splice tray, couplings, pigtails and cable gland. Regarding different couplings, you can choose from SMA, ST, SC, LC, FC-PC, SC-RJ and E-2000. The front panel and the splice cassette can be removed for splicing and since the cassette is magnetizable, it can easily be fixed onto a splice unit. The cassette has got a hole for splice units with a bolt.
The powder coated stainless steel housing is also magnetizable so that the splice box can easily be affixed to another housing or to a switch cabinet in case of no different tray. Furthermore, FIMP has got a clip for DIN rail mounting (35mm) and optional a kit for wall fastening. Thus, there are space-saving and flexible solutions for mounting our FIMP.
Especificaciones Tecnicas
| Type MM | 6xST Duplex 62MM | 6xSC Duplex 62MM | 3xLC Quattro 62MM | 6xE2000 Duplex 62MM | 6xST Duplex 50MM | 6xSC Duplex 50MM | 3xLC Quattro 50MM | 6xE2000 Duplex 50MM |
|---|---|---|---|---|---|---|---|---|
| Article no. | 06000 22196-00 | 06000 22396-00 | 06000 22493-00 | 06000 22596-00 | 06000 12196-00 | 06000 12396-00 | 06000 12493-00 | 06000 12596-00 |
| Type SM | 6xST Duplex | 6xSC Duplex | 6xSC Duplex 8° APC | 3xLC Quattro | 6xE2000 Duplex | 6xE2000 Duplex 8° APC | ||
| Article no. | 06000 36196-00 | 06000 36396-00 | 06000 38396-00 | 06000 36493-00 | 06000 36596-00 | 06000 38596-00 | ||
| Weight | 450 g | |||||||
| Dimensions | Height: 115 mm; Width: 61 mm; Depth: 113 mm | |||||||
| Operating Temperature | –40 °C – +75 °C | |||||||
| Humidity | 10 % – 95 % relativ, non condensing | |||||||
| Housing | Stainless steel, powder coated | |||||||
| Accessories | Article no. | Description | ||||||
| 0600E90001 | Cable gland M20 | |||||||
| 0600E90002 | Nut M20 | |||||||
| 0600E90003 | Strain relief | |||||||
| 0600E90004 | Front panel SC Duplex, not assembled | |||||||
| 0600E90005 | Front panel SmartHole, not assembled | |||||||
| 0600E90006 | Front panel SC-RJ, not assembled | |||||||
| 0600E90007 | Splice holder | |||||||
| 0600E90008 | Splice protection | |||||||
| 0600E90009 | Cable tie | |||||||
| 0600E90010 | Lable strip | |||||||
| 0600E90011 | Screws | |||||||
| 0600E90013 | Dual Mount Kit | |||||||
| 0600E90014 | Lens tapping screw for fixing front panel, Philipps screw, 2,2 x 9,5 mm | |||||||
| 0600E90015 | Protection lid | |||||||
| 0600E90016 | Mounting angle for protection lid | |||||||
| Referencia | Descripcion |
|---|---|
| FIMP | Industrial compact Splicebox |
| Documentacion | Datasheet |