FIMP-REG
Características destacadas
- Splicebox according
- to DIN 43880
Descripción
The industrial splice box FIMP-REG according to DIN 43880 is by far smaller that comparable 19"solutions. Its inner values are really convincing as well so that the installation is quite simple and done very fast. FIMP-REG is ready for splicing and contains splice tray, couplings, pigtails and cable gland. Regarding different couplings, you can choose from ST, SC and LC.
The front panel and the splice cassette can be removed for splicing and since the cassette is magnetizable, it can easily be fixed onto a splice unit. The cassette has got a hole for splice units with a bolt.
The polyamide housing of FIMP-REG has got a clip for DIN rail mounting (35mm). Thus, the user can flexibly mount the device in either switch cabinets or distribution boards.
Especificaciones Tecnicas
Type MM | 3xST Duplex 62MM | 3xSC Duplex 62MM | 2xLC Quattro 62MM | 3xST Duplex 50MM | 3xSC Duplex 50MM | 2xLC Quattro 50MM |
---|---|---|---|---|---|---|
Article no. | 06400 22193-00 | 06400 22393-00 | 06400 22492-00 | 06400 12193-00 | 06400 12393-00 | 06400 12492-00 |
Type SM | 3xST Duplex | 3xSC Duplex | 2xLC Quattro | |||
Article no. | 06400 36193-00 | 06400 36393-00 | 06400 36492-00 | |||
Weight | 220 g | |||||
Dimensions | Height: 90 mm; Width: 107 mm; Depth: 80 mm | |||||
Modules | 6 | |||||
Operating Temperature | –40 °C – +75 °C | |||||
Humidity | 10 % – 95 % relative, non condensing | |||||
Housing | Polyamide, GRILON TS V0 | |||||
Accessories | Article no. | Description | ||||
0600E90001 | Cable gland M20 | |||||
0600E90002 | Nut M20 | |||||
0600E90003 | Strain relief | |||||
0600E90007 | Splice holder | |||||
0600E90008 | Splice protection | |||||
0600E90009 | Cable tie |
Referencia | Descripcion |
---|---|
FIMP-REG | Splicebox according to DIN 43880 |
Documentacion | Datasheet |