Frontline’s “RS-232 ComProbe II”

Características destacadas

  • Directly in-line or
  • Connected via a combination of a provided Y-cable (enabling a quick connection to permanent or semi-permanent tap into the communication line) and/or the 6 foot RS-232 extension cable.
  • Some monitoring situations may require a pair of 25-pin to 9-pin adapters which are also included in the product.

Descripción

Frontline’s “RS-232 ComProbe II” – A Portable, Rugged and Easy-to-Use Device for monitoring Asynchronous RS-232 communications

To keep pace with advances in technology, the NetDecoder™ analyzer has been upgraded to support the new "RS-232 ComProbe II". Most new laptops and PCs do not have PCMCIA interfaces and the PC industry has migrated towards USB ports. To help our customers monitor asynchronous serial communications via their PC's USB port, Frontline has introduced its new RS-232 ComProbe II. This new RS-232 ComProbe II is a flash drive-sized interface that plugs into a PC's USB port.

The RS-232 ComProbe II monitors and captures Asynchronous RS-232 communications. It does not lose timing and control signal information. With this new interface, Frontline has made its NetDecoder analyzer more rugged, easier to use, portable and transportable. It allows you to spend more time doing your real job.

Monitoring Flexibility

The RS-232 ComProbe II provides customers a great deal of flexibility in tapping into Async RS-232 bus configurations to address different monitoring situations.

The RS-232 ComProbe II can be used:

  • Directly in-line or
  • Connected via a combination of a provided Y-cable (enabling a quick connection to permanent or semi-permanent tap into the communication line) and/or the 6 foot RS-232 extension cable.
  • Some monitoring situations may require a pair of 25-pin to 9-pin adapters which are also included in the product.

An example of an in-line asynchronous RS-232 monitoring application is shown here.

I/O Settings

The new RS-232 ComProbe II allows the user plenty of options for monitoring various serial communication setups. The I/O Settings dialog allows the user to configure the setup.

The RS-232 ComProbe II supports data rates up to 921.6Kbps. The user can pick one of the standard rates in the drop down box in the I/O Settings dialog. For non-standard rates, the user can simply type in the value in the box.

The RS-232 ComProbe II can monitor serial communications with 5, 6, 7 or 8 data bits and with 1, 1.5 or 2 stop bits. The device also supports all the standard parity types (None, Odd, Even, Mark, Space, and Ignore).

The user can also choose the bit order on their serial communication circuit. The choices are either LSB (least significant bit) first or MSB (most significant bit) first. LSB first is normal, while MSB first is considered "reversed" from normal. This option reverses the order of the bits within each byte.

The user can also choose to monitor either DTE only, DCE only or both DTE and DCE ends of the communication.

The NetDecoder software and all the associated components for the RS-232 ComProbe II are shipped in a convenient and stylish Cable Bag. The complete set of all included parts in this product package is shown here.

Setup Information for the RS-232 ComProbe II

The RS-232 ComProbe II is used for sniffing serial, asynchronous RS-232 communications. The RS-232 ComProbe II is a finger-sized device that connects to the analysis PC via a USB port.

The RS-232 ComProbe II is passive on the bus. Some serial analyzers receive the data from one side of the circuit under test and retransmit it to the other side. The RS-232 ComProbe II does not work that way. It does not affect the communications on the bus. It passively collects all data on the wire and passes it up to Frontline’s analyzer software.

End users typically have different RS-232 bus configurations. Frontline includes accessories with the RS-232 ComProbe II which provide great flexibility in tapping various RS-232 communication networks. The RS-232 ComProbe II is shipped with:

  1. One 6-foot USB Cable.
  2. One RS-232 Y-Cable.
  3. One 6-foot RS-232 Extension Cable.
  4. Two 25-Pin to 9-Pin Adapters.
  5. One Cable Bag to Keep Everything In.

The RS-232 ComProbe II can be used directly in-line, or connected via a combination of a provided Y-cable and/or the 6-foot RS-232 extension cable. Some monitoring situations may require a pair of 25-pin to 9-pin adapter.

The various monitoring connection options are shown below:

Referencia Descripcion
RS-232 ComProbe II A Portable, Rugged and Easy-to-Use Device for monitoring Asynchronous RS-232 communications
Si continuas utilizando este sitio aceptas el uso de cookies. más información