IOL3000
Características destacadas
- 4 x Analog Signal, 8 x Digital Signal
- Point-to-Point Structure
- Stainless Steel, Powder Coated
- Top-Hat Rail
Descripción
The fiber optic system IOL3000 transmits digital signals (e.g., contact closures, control-signals) and analog signals via fiber optics.
The fiber optic system is able to transmit up to 8 digital signals (12–24 VDC) and/or 4 analog signals (0–10 V or 0–20 mA, digitalized via A/D converter with a resolution of 10 Bit) within a point-to-point structure or line-structure.
The interconnection of an input/pass system (ED) allows the transmission of additional digital and analog data. You can choose if you want to have an electric disjunction (OR) of electrically and optically received data or if the electric data shall overwrite the optical data. In case of analog data the DIP switch must be used to decide whether the optical or the electrical signals shall be transmitted. The devices are available for line or ring structures as one fiber solutions.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
Especificaciones Tecnicas
Transmitter IOL3000 | P-ST | H-ST | MM-ST | MM-SC | SM-ST | SM-SC | SM-E2 | ||
---|---|---|---|---|---|---|---|---|---|
4 x Analog 0–10 V | 03000 1101 | 03000 1112 | 03000 1121 | 03000 1123 | 03000 1131 | 03000 1133 | 03000 1135 | ||
4 x Analog 0–10 V 8 x Digital 12–24 VDC | 03000 1201 | 03000 1212 | 03000 1221 | 03000 1223 | 03000 1231 | 03000 1233 | 03000 1235 | ||
8 x Digital 12–24 VDC | 03000 1301 | 03000 1312 | 03000 1321 | 03000 1323 | 03000 1331 | 03000 1333 | 03000 1335 | ||
4 x Analog 0–20 mA 8 x Digital 12–24 VDC | 03000 1401 | 03000 1412 | 03000 1421 | 03000 1423 | 03000 1431 | 03000 1433 | 03000 1435 | ||
4 x Analog 0–20 mA | 03000 1501 | 03000 1512 | 03000 1521 | 03000 1523 | 03000 1531 | 03000 1533 | 03000 1535 | ||
Receiver IOL3000 | P-ST | H-ST | MM-ST | MM-SC | SM-ST | SM-SC | SM-E2 | ||
4 x Analog 0–10 V | 03000 2101 | 03000 2112 | 03000 2121 | 03000 2123 | 03000 2131 | 03000 2133 | 03000 2135 | ||
4 x Analog 0–10 V 8 x Digital 12–24 VDC | 03000 2201 | 03000 2212 | 03000 2221 | 03000 2223 | 03000 2231 | 03000 2233 | 03000 2235 | ||
8 x Digital 12–24 VDC | 03000 2301 | 03000 2312 | 03000 2321 | 03000 2323 | 03000 2331 | 03000 2333 | 03000 2335 | ||
4 x Analog 0–20 mA 8 x Digital 12–24 VDC | 03000 2401 | 03000 2412 | 03000 2421 | 03000 2423 | 03000 2431 | 03000 2433 | 03000 2435 | ||
4 x Analog 0–20 mA | 03000 2501 | 03000 2512 | 03000 2521 | 03000 2523 | 03000 2531 | 03000 2533 | 03000 2535 | ||
FO-connector | ST | ST | ST | SC | ST | SC | E-2000 | ||
Fiber type | POF 980/1000 μm | HCS 200/230 μm | Multimode 62,5 (50)/125 μm | Singlemode 9/125 μm | |||||
Optical budget | 12 dB | 12 dB | 12 dB | 16 dB | |||||
FO range | 50 m (180 dB/km) | 200 m (8 dB/km) | 5 km (1 dB/km) | 30 km, others up to 100 km on request (0,3 dB/km) | |||||
Wavelength | 650 nm | 850 nm | 1310 nm | 1310 nm 1550 nm | 1310 nm | 1310 nm 1550 nm | |||
Accuracy Receiver | 0,2 % | ||||||||
Cable length | 1 m | ||||||||
Connector | 16-pole Screw-Terminal | ||||||||
Status-LEDs | Power supply (green) / Data (yellow) / Status (red) | ||||||||
Power supply | 12–30 VDC, other voltages on request | ||||||||
Power consumption | 5 Watts, 200 mA (24 V) | ||||||||
Potential separation | 500 VDC | ||||||||
Operating temperature | –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others) | ||||||||
EMC | EN61000-6-2 / EN55022 Class B + A1 + A2 | ||||||||
Weight | 570 g | ||||||||
Dimensions | 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector) | ||||||||
Housing | Stainless steel, powder coated |
Referencia | Descripcion |
---|---|
IOL3000 | Analog- and Contact closure FO-System 8 X Contact closure 4 X ANALOG SIGNAL |
Documentacion | Datasheet |