iPC-I XC16/PMC
Características destacadas
- Active CAN board with 16 bit microcontroller
- Common driver interface for easy exchange of the PC interface type
- Features filtering, preprocessing, time stamped storage of CAN messages
- High-/Low-Speed CAN bus interface
- LIN interface
- Galvanic isolation
Descripción
Active PMC board
2 x CAN (High-/Low-Speed), LIN
The iPC-I XC16/PMC is an active PMC board for 5 V and 3.3 V PMC bus systems with high/low-speed CAN interface and LIN interface. The on-board microcontroller offers filtering, preprocessing, transmission and time stamped storage of the CAN messages.
This product is not recommended for new developments (Last time buy: December 31, 2016). For new developments we recommend to use the successor product IXXAT CAN-IB 410/PMC.Fields of application
Covering a wide range of industrial and automotive CAN applications, this is a powerful and economic active CAN PMC interface with two CAN and one LIN channel. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. The board is supported by the IXXAT driver packages and higher layer protocol APIs as well as by the IXXAT tool suite. A detailed software support overview can be found here.
Technical specifications
| PC bus interface | PMC Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt |
| Memory range | Plug & Play, 16 kB memory mapped and 128 bytes I/O area |
| Interrupts | INT A, Plug & Play |
| Microcontroller | Infineon XC161 |
| CAN controller | TwinCAN (two CAN channels); CAN 2.0 A/B |
| CAN bus interface | ISO 11898-2 and ISO 11898-3, Sub D9 connector according to CiA 303-1, high-/low-speed bus interface switchable via software |
| LIN controller | TJA1020 |
| LIN bus interface | ISO 9141/LIN, Master/Slave mode switchable via software, galvanic isolation |
| Power supply | 5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ. |
| Galvanic isolation | 1 kV, 1 sec. |
| Temperature range | -20 ºC ... +70 ºC |
| Certification | CE, FCC |
| Size | Approx. 74 x 149 mm single CMC |
Contents of delivery
- PC/CAN interface card, manual
- CAN driver VCI for Windows 2000, XP, Vista, Windows 7
- Simple CAN monitor "miniMon"
Order number
| 1.01.0049.33660 | iPC-I XC16/PMC; two CAN channels with high/low speed bus interface and galvanic isolation; one LIN channel with galvanic isolation |
Especificaciones Tecnicas
| PC bus interface | PMC Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt |
| Memory range | Plug & Play, 16 kB memory mapped and 128 bytes I/O area |
| Interrupts | INT A, Plug & Play |
| Microcontroller | Infineon XC161 |
| CAN controller | TwinCAN (two CAN channels); CAN 2.0 A/B |
| CAN bus interface | ISO 11898-2 and ISO 11898-3, Sub D9 connector according to CiA 303-1, high-/low-speed bus interface switchable via software |
| LIN controller | TJA1020 |
| LIN bus interface | ISO 9141/LIN, Master/Slave mode switchable via software, galvanic isolation |
| Power supply | 5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ. |
| Galvanic isolation | 1 kV, 1 sec. |
| Temperature range | -20 ºC ... +70 ºC |
| Certification | CE, FCC |
| Size | Approx. 74 x 149 mm single CMC |
| Referencia | Descripcion |
|---|---|
| 1.01.0049.33660 | iPC-I XC16/PMC Active PMC board |
| Documentacion | Dsatasheet |