IXXAT Econ 100
- Powerful ARM-based platform with Linux operating system and passive cooling
- High communication performance for real-time applications
- Easy programming using Soft-PLC or Application Development Kits
- Highly customizable to meet the requirements of your application
- Easily expandable to support various fieldbus and industrial Ethernet protocols (expansion board)
- Out-of-the-box: EtherCAT and CANopen master
- Also available as OEM and board-level product
Stand-alone embedded PC for DIN rail mounting
with multi-protocol support
IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devices to complex robot-based systems.
How it works
During the development of the IXXAT Econ 100 special attention was paid to the requirements of the various fields of application. Thus, the device has a powerful CPU, industry-grade memory, a rugged metal casing as well as a fanless design with an extended temperature range of -40 °C to +70 °C.
IXXAT Econ 100 uses a dual-core Cortex A9 CPU. The internal RAM has a standard size of 256 MB. Operating system and programs are stored on flash memory on a SD card.
The basic version of the device has each two Ethernet, CAN and USB interfaces. Expansion of interfaces and functionality is provided by HMS as customized development service.
The unique modular concept of the IXXAT Econ 100 enables you to easily extend the existing interfaces and functions, allowing to adapt the device to your specific requirements. Customized gateway and control solutions can therefore be swiftly and easily implemented for a variety of different fieldbus and industrial Ethernet standards.
HMS offers software packages making the IXXAT Econ 100 an out-of-the-box master for EtherCAT and CANopen.
For the EtherCAT master functionality the proven EtherCAT Master protocol software from acontis is used. The specially optimized link layer enables the IXXAT Econ 100 to operate with cycle times of less than 1 ms.
The selected EtherCAT master implementation, the included interface drivers and the pre-installed Linux operating system enable rapid implementation of customized EtherCAT application as well as the rapid adaption of existing applications to the compact and powerful IXXAT Econ 100.
The IXXAT Econ 100 is also a perfect solution for the connection of several EtherCAT networks, e.g. enabling the operation as EtherCAT master in one system and at the same time as EtherCAT slave in another network.
For the integration into CANopen networks IXXAT offers a customized multi-channel variant of the proven IXXAT CANopen master/slave software. This allows the rapid implementation of controllers for CANopen networks, as well as the use of IXXAT Econ 100 as gateway or measurement node.
|CPU||Xilinx Zynq SoC - Dual-Core Cortex A9 CPU with integrated FPGA of the Artix 7 Family
|CPU clock frequency||667 MHz
|FPGA (within CPU)||28 k logic cells
|Memory||256 MB DDR-RAM
|Flash||256 MB SD card (industrial grade: optional
up to 32 GB)
|On-board interfaces||- 1 x 1000/100/10 MBit LAN
- 1 x 100/10 MBit LAN (e.g. EtherCAT Master)
- 2 x CAN High-Speed, galvanic isolated
- optional: 1 x RS232 interface, instead of 1 x CAN
|Environment temperature||-40 °C to +70 °C
|Power supply|| 9-32 V, 2-pin Phoenix Contact connector
|Power consumption||4-5 watt, depending on FPGA use
|Mounting||DIN rail mounting with integrated DIN rail clip or Desktop Case (no clip)
|Dimensions||72 x 154 x 105 mm
|1.01.0271.00051||IXXAT Econ 100
|1.02.0271.10003||CANopen Software for IXXAT Econ
|1.02.0271.00003||Runtime license: CANopen Master for IXXAT Econ 100; required for each Econ 100
|1.24.0271.10002||EtherCAT Master Class A Software for IXXAT Econ
|1.24.0271.00002||Runtime license: EtherCAT Master Class A for IXXAT Econ 100; required for each Econ 100
|1.24.0271.10001||EtherCAT Master Class B Software for IXXAT Econ
|1.24.0271.00001||Runtime license: EtherCAT Master Class B for IXXAT Econ 100; required for each Econ 100
|CPU||Xilinx Zynq SoC - Dual-Core Cortex A9 CPU with integrated FPGA of the Artix 7 Family|
|CPU clock frequency||667 MHz|
|FPGA (within CPU)||28 k logic cells|
|Memory||256 MB DDR-RAM|
|Flash||256 MB SD card (industrial grade: optional up to 32 GB)|
|On-board interfaces||- 1 x 1000/100/10 MBit LAN - 1 x 100/10 MBit LAN (e.g. EtherCAT Master) - 2 x CAN High-Speed, galvanic isolated - optional: 1 x RS232 interface, instead of 1 x CAN|
|Environment temperature||-40 °C to +70 °C|
|Power supply||9-32 V, 2-pin Phoenix Contact connector|
|Power consumption||4-5 watt, depending on FPGA use|
|Mounting||DIN rail mounting with integrated DIN rail clip or Desktop Case (no clip)|
|Dimensions||72 x 154 x 105 mm|
|1.01.0271.00051||IXXAT Econ 100|
|1.02.0271.10003||IXXAT Econ 100|
|1.02.0271.00003||IXXAT Econ 100|
|1.24.0271.10002||IXXAT Econ 100|
|1.24.0271.00002||IXXAT Econ 100|
|1.24.0271.10001||IXXAT Econ 100|
|1.24.0271.00001||IXXAT Econ 100|