Características destacadas

  • WLAN access point or client
  • IEEE802.11 abgn 2.4/5 GHz
  • 2 Ethernet port
  • 2 digital inputs & outputs
  • USB & RS-232
  • Redundant power supply
  • DIN Rail mounting kit
  • Programmability


The NB1600-WLAN can be configured as WLAN access point or as wlan client. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

The NB1600 WLAN router is an industrial grade access point with additional functions. The integrated WLAN card can be configured as access point or as client. In access point mode, the router can establish up to 4 different WLAN networks.

As a special highlight NB1600 offers two Ethernet ports that are highly configurable. Used as LAN ports they may form a 2 port switch or have two separated and routed IP networks. Used as WAN ports the NB1600 acts as an industrial firewall with VPN client functionality.

The RS-232 serial interface can be configured by software as system console or serial device server. Legacy equipment that does not have any Ethernet port can be hooked up this way.

The NB1600 has two isolated binary inputs and two relay outputs for direct connection of sensors and actuators.

The USB port enables configuration and firmware update from memory stick. Ask for support of your specific USB device.

NB1600 supports major VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two NB1600 via trough a VPN tunnel.

Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe.

  • WLAN network with multiple access points
  • WLAN client for WLAN disabled devices

Especificaciones Tecnicas

WLAN / Wi-FiIEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO Access Point or Client Max users in access point mode: WPA: 54, WPA2: 110 Antenna connector: SMA female, supporting one or two antennas
Digital I/O 2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC 2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W Connector: 8 pins of 15-pin terminal block
Ethernet2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed, RJ45
USBUSB Host interface, type A
SerialProtocol: 3-wire RS232 Connector type: 3 pins of 15-pin terminal block
PowerRedundant power supply inputs Input voltage: 12V DC to 48V DC (-15% / +20%) Max. power consumption: 5W Connector type: 2+2 pins of 15-pin terminal block
Dimensions124.2mm x 45mm x 110mm, ca. 450g
EnvironmentTemperature range: -25 °C to +70 °C Ingress Protection Rating: IP40; MTBF: 226'000h
Safety StandardsEN60950-1:2006
EMC StandardsEN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission) EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
Type ApprovalsCE according to directive 1995/5/EC (R&TTE) FCC according to 47 CFR, Part 15
Order numbers: NB1600-W(contact sales for more models, options or project specific adaptations) WLAN Router, configurable as access point or client

Referencia Descripcion
NB1600-W NB1600 WLAN WLAN access point, wlan client
Si continuas utilizando este sitio aceptas el uso de cookies. más información