| Hardware | |
| Processor | ARM 7 TDMI 50MHz |
| I/O controller | 16C550C or compatible |
| Memory | 8MB SDRAM, 1 MB Flash |
| Connector type | RJ45 for LAN, DSUB 9 female for serial Port |
| Interface | |
| LAN interface | Auto-detecting 10BaseT/100BaseTx |
| Protocols | TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS |
| Serial interface | RS232/422/485 switchableNew: Connector DB9 male, not female |
| No. of port | 1, Speed up to 460Kbps |
| Available Modes | RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex, with echoRS485 2 wire, half duplex, without echo |
| Signals | RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND |
| RS485 Data control | Controlled by ART (Automatic Receive Transmit control) or by RTS |
| Performance | |
| Speed | up to 460Kbps |
| Parity | None, even, odd, space, mark |
| Data bits | 5, 6, 7, 8 |
| Stop bits | 1, 1.5, 2 |
| IRQ | None |
| I/O address | None |
| Operating Modes | |
| Driver mode | VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol. |
| TCP Raw Server | Raw data transfer over TCP/IP. Accepts multiple incoming connections. |
| TCP Raw Client | Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections. |
| TCP Advanced Settings | Special settings for user-defined modes |
| UDP Mode | Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data. |
| Null Modem Tunnel | Connecting two NetCom used as virtual null modem cable. |
| IP Modem | The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation. |
| Print Server | The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems |
| Power and Environment | |
| Power requirements | 9 - 30V DC, 200mA @ 12V |
| Power supply Adapter | 12V DC 1A |
| Dimension | 73×115×27 mm³ (W×L×H)101×121×27 mm³ with DB9 connector and ears |
| Operating Temp | 0°C - 60°C |
| Storage Temp | -20°C - 85°C |
| Case | SECC sheet metal (1mm) |
| Weight | 0.2kg |
| Special Features | |
| Installation | Configuration utility automatically finds NetCom devices in the network |
| Operating mode | Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. |
| Configuration | Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP |
| SNMP | special VScom MIB included |
| ART | Automatic Receive Transmit control for RS485 |
| DNS | Domain Name Server support |
| Serial interface | Serial Interface configurable with external switch |
| Firewall | Special precautions for Firewall environments |
| Firmware | Firmware update over WEB Browser, Telnet, ComPort |
| LEDs | LEDs for Power, Tx, Rx, LAN Link, LAN Speed |
| Security | |
| Password access | Every capabilities of configuration use the same password including SNMP V3 |
| Optional Accessories | |
| DK 35A | DIN-Rail mounting kit |
| Serial Adapter | RS232 Null-Modem adapter, change male to female |
| VS-POE 10 | Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.) |
