Cod: 6675 - Nombre: NetCom Plus 413

VScom
Model NetCom Plus 411 with WLAN

NetCom Plus 413 (4x RS232/422/485, expandable) (NetCom 413, NetCom 413 PRO)

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows

Características destacadas

  • Controls 4 RS232 or RS422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 4x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtual Com Ports. The network is Gigabit Ethernet or optionally wireless by WLAN 802.11b/g/n, another option is Power over Ethernet.

The NetCom+ Servers use a state-of-the art RISC processor for low power and cost effective design. The 4 and 8 port models are very similar, including the case size. Power supply is via DC adapter, or optionally via Ethernet cable with POE IEEE 802.3af.
The serial ports enable data rates of up to 12Mbps in RS422/485 or 1000kbps in RS232 modes. The ports also allow every non-standard bitrate up to 3.5Mbps, and many above that (e.g. 1Mbps). See the FAQ.
The USB 2.0 port supports USB-COM Plus modules, to add more non-isolated and also isolated serial ports. The USB port may also connect external WLAN.

NetCom+ can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.
As modern devices the NetCom+ provide encryption for all communication.

Application
Secure Remote Monitoring SCADA system Building automation system Self-service banking system Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Other remote and distributed serial devices control
6675NetCom Plus 413 (4x RS232/422/485, expandable)
Packing list

  • NetCom Plus Serial Device Server
  • Mounting brackets for 19-inch rack
  • Wall mount plates
  • Terminal block for Power Supply
  • CD-ROM with Driver and configuration software

Options
6689WLAN Kit internal internal module 802.11b/g/n, pigtail and antenna Purchase time option, not for later retrofitting This option allows for replacement of NetCom 423 WLAN
6690WLAN Kit external USB stick 802.11b/g/n, antenna
6031Power supply adapter 12V DC, 1A
661Serial Null-Modem adapter 9PF-9PF, change male to female
>Back to top
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X