Características destacadas

  • Single or dual radio 802.11a/b/g/n/ac (MIMO 3T3R), up to 1.3 Gbps (radio bit rate), optional LTE mobile broadband router and GPS (coming soon)
  • MESH, WMM QoS, multiple SSID and centralized RADIUS security supported
  • Supports DFS and TPC
  • Auto-sensing Gigabit 10/100/1000 Base TX auto MDI/MDIX network interface
  • Dual insulated redundant power supply input (24 to 110 VDC EN50155 nominal or 12 to 36 VDC) or PoE+
  • Shock & vibration proof, rugged aluminum enclosure, IP66 seal rating


RailBox is a rugged device designed for railway and light rail applications. It can be mounted in trains, subways, trams or in any equipment that requires robustness and mobility.


RailBox can be implemented by system integrators and rail vehicle manufacturers who are seeking to establish high availability for:

  • uninterrupted train-to-trackside communications (CBTC, CCTV, VoIP, preventive maintenance, PIS...)
  • carriage coupling (to support any train composition change and provide a redundant & reliable onboard network)
  • reliable onboard vehicle network (WiFi onboard, train announcements, infotainment...)

The device relies on the multi-streams MIMO technology that contributes to an expanded coverage, higher data throughput and increased radio link reliability.


Furthermore it combines an optional LTE mobile broadband router plus a GPS allowing using the device as a mobile hotspot in transportation applications (coming soon).


It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C (extended :-40°C to +85°C), shock and vibration proof, protection against dust and water projections (IP66).

Ordering information
    RailBox/RRXB   Single or dual WiFi Access Point, Ethernet Bridge, Repeater, MESH point (IEEE 802.11a/b/g/n/ac) or LTE mobile broadband router for railway and mobile applications, shipped with a fixing plate (already mounted)    
  Additional accessories :  
    WL-M12U/8X-ETH-2M WL-M12U/8X-ETH-5M WL-M12U/8X-ETH-10M   WLg-M12U-PWR-2M WLg-M12U-PWR-5M WLg-M12U-PWR-10M     Speedlock Ethernet cable, 10 G, 8pts X-coded M12 to RJ45, 2 meters  Speedlock Ethernet cable, 10 G, 8pts X-coded M12 to RJ45, 5 meters Speedlock Ethernet cable, 10 G, 8pts X-coded M12 to RJ45, 10 meters   Ultra-Lock waterproof 4-point M12 power supply cable, 2 meters Ultra-Lock waterproof 4-point M12 power supply cable, 5 meters Ultra-Lock waterproof 4-point M12 power supply cable, 10 meters   NB: PoE version of RailBox can't be powered by an external power supply cable    

Especificaciones Tecnicas

Ethernet link 2-port Gigabit Ethernet 10/100/1000 auto-sensing, water and vibration proof rapid connect 8-point M12 X-coded connectors (CAT-6A) plug & play mode & auto MDI/MDIX cross-over, optional Ethernet bypass that redirects the network traffic in case of device or power supply failure (for daisy chain topologies)
WiFi network 1 or 2 radios IEEE 802.11a/b/g/n or IEEE 802.11a/b/g/n/ac, MIMO 3T3R, 2.4 / 5 GHz
Wireless WAN/GPS Optional (coming soon) : LTE mobile broadband router, dual SIM, GPS receiver
WiFi radio data rate 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps802.11n: MCS0-7, 3 streams (6.5 to 450 Mbps)802.11ac: MCS0-9, 3 streams (6.5 Mbps to 1.3 Gbps)
Operating frequencies ISM : 2.4-2.483 GHz (up to 14 channels)UNII : 5.15-5.25 GHz (up 4 channels)UNII-2 : 5.25-5.35 GHz (up to 4 channels)UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC
Output power Up to 24 dBm (aggregate), depending on radio card model
Radio connectors 3 or 6 QMA connectors (no antenna provided)
Security IEEE 802.1x (centralized RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, legacy WEP supported
WiFi Modes Access point, client, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, client router, WMM QoS, multicast, VPN, dynamic routing and firewall modes fully supported, fast roaming (less than 30 ms), redundancy (VRRP), carriage coupling system (SRCC)
Administration Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, administration software for Windows/Linux (ACKSYS NDM), save / restore configuration key (C-Key)
LEDs Signaling Radio : quality, activity and status | Ethernet : link 10/100/1000, activity | Power : on-off
Alarms & Inputs One solid state relay output warning (with configurable action), 1 Form A, 60VDC 0.1A max & one input for external device control 24VDC max (3-pin Waterproof M8 connector)
Power supply Dual insulated redundant input (1500V insulation, M12 connectors 4-pole A-coded) 24 to 110 VDC (EN50155 nominal) or 12 to 36 VDC depending on the model, with ground lug. PoE + (IEEE 802.3at Type 2 Class 4) model with ground lug also available.
Consumption 16W typical power consumption (dual radio), 20W max
Dimensions & weight Product : compact shockproof rugged aluminum enclosure, (L: 80 x l: 175 x h: 57 mm), 900gRemovable fixing plate : 4-point fixing plate with ground lug (L: 80 x l: 225 x h: 4 mm), 200g
Standards Safety : EN45545-2 (HL3), NF F16-101 (I1F1) (Fire and Smoke) / EN60950-1Radio : EN300-328 1.8.1 (2.4 GHz), EN301-893 1.7.1 (5 GHz, DFS)EMC : EN50155 / EN50121-3.2, EN301-489-1, EN301-489-17Environmental : EN61373 (shocks and vibration), EN60068 (climatic)
Environment IP66 seal ratingOperating temperature: -25°C to +70°C (HR 0-99%) or extended -40°C to +85°C, storage: -40°C to +80°CGORE ® protective vent (dehumidifying membrane)

Referencia Descripcion
RailBox/RRXB RailBox Rugged dual 802.11ac WiFi access point, client & repeater for railways
Si continuas utilizando este sitio aceptas el uso de cookies. más información